@MrObjection The engine is a BFE-150 xml downsized to be very tiny, then a fuselage intake is put over it, you then connect a hinge rotator to it, and use fuselage cylinder to hide it all.
It's a good aircraft, but it's still rough around the edges.
What I'm exactly talking about is it's looks, make the cockpit fully connect to the Fuselage, use the Fuselage tubes customization to its fullest, use the manual corner settings so you can make use the smooth corners for the top of the cockpits and hard for their bottom.
You can actually eliminate the blocks on the sides, used as anchors for the landing gears, and instead make the bottom row of fuselage tubes wider.
@MattEpic The Fuselage tubes can hold fuel too, so say goodbye for the fuel blocks too.
You should also use the Fuselage inlets instead of the normal one, they let you fully customize their appearance, but they only have connections on their back and front, instead of 6 like the normal tubes.
@Nerfaddict add more inputs to what?
The rotators?
Did you forget to put a fifth engine on it?
Nose is bent.
Otherwise, it looks good
It looks like an airliner armed for combat.
Must be a very critical situation in the country it serves.
@Lancelot20021230 I would recommend using an Engine positioning that is like the A-10, on top of the wing maybe.
Or even put the intakes above the wing while the engine still stays in line.
Was it based on Fairchild F-X?
@Kendicus The earlier he starts using cylinders, the better, besides, they're much easier to use when you want to make a good looking ship.
Start using fuselage cylinders, please.
I think you should re-do this aircraft.
Forward visibility is for pansies, I guess.
Nice Longer Bomber Boi, man.
@eagleskull14 But you can have more fuel, and a more smooth design if you use fuselage cylinders.
Start using fuselage cylinders.
Was the nose supposed to be bent to it's right side?
You need to start using fuselage cylinders.
@Plane66373637 Okay, I guess.
Why is this thing so blocky?
Dude, I have the same HW car in slightly different colors.
Had almost the same idea as you, but, instead of a replica car that properly works, I made a plane that looks bad and works more or less.
@Mahesa25 Probably to the Chaparral 2J.
AMERICAN FROGFOOT.
AMERICAN FROGFOOT.
With a bit of F/A-18.
W I D E boi.
@SuperPuggus The BFE-150, the second big one.
Chibi and Chonky.
Put this onto the Area 51 challenge.
@MrObjection The engine is a BFE-150 xml downsized to be very tiny, then a fuselage intake is put over it, you then connect a hinge rotator to it, and use fuselage cylinder to hide it all.
@MrObjection Strange, try this one:
https://en.m.wikipedia.org/wiki/Mikoyan-Gurevich_MiG-21
Go down to Specifications and use the drawings.
Hey man, I have something to help you out:
https://upload.wikimedia.org/wikipedia/commons/d/d8/MikoyanMiG-21Fishbed_Schematics.png
Make the fuselage thicker or make the wings smaller.
Looks pretty good, but, it might just be me, but, it looks short.
Maybe the right word, is Chibified.
Make it a tad longer.
Why did you repost it?
@Homemade It actually is, just like the MIG-21 is a Delta wing.
You should've clarified that you wanted a Tailless Delta wing.
A few things:
The P-38 didn't three cockpits, just on in the central fuselage.
On Simple Planes, the miniguns will destroy the props, clip them into the central fuselage too.
@Nerfaddict you could play ACX on an emulator...
First I read about the shock Cannons, are they like Gleipnir's?
Second, god almighty, can this thing even fit in a landing strip?
@GhosTerSix How big are you thinking?
The advice I made on the JD-63 also works here.
It's a good aircraft, but it's still rough around the edges.
What I'm exactly talking about is it's looks, make the cockpit fully connect to the Fuselage, use the Fuselage tubes customization to its fullest, use the manual corner settings so you can make use the smooth corners for the top of the cockpits and hard for their bottom.
You can actually eliminate the blocks on the sides, used as anchors for the landing gears, and instead make the bottom row of fuselage tubes wider.
@Alienbeef0421 Large ShockWave Missiles, apart from the Nukes Belka used ages ago, there are no other nukes on Strangereal.
@Nerfaddict the Messerschmitt or the Aigaion?
Debiru Man.
Now we need a 90's version and a 2018(?) version.
Needs a Sukhoi Neck, the rudders need to be straight up.
But this can pass as good F-18 Hornet.
You know the WUAV has a bigger wing right?
https://acecombat.fandom.com/wiki/WeaponUAV?file=ADF-11FWeapon_UAV.jpg
Sorry to say this, Mobius, I know you're more experienced than me, but, look for references.
@EternalDarkness Understood.
@Mmdben I only looked at the 3 view pic on the site, but it seems angled, instead of offset.
Use fuselage cylinders and cones, forget that the blocks of any kind exist.
Is it normal for it to "stutter" once the third Engine is active?
Why not make the body higher, so you can put the wing on the fuselage?
And put the rudders on the back wings, so the jet exhaust doesn't melt the rudder off.
@Squirrel I think he means the screenshots you made with it flying and the ones with blueprint drawings.
Also, how did you get the metal paint?
@MattEpic The Fuselage tubes can hold fuel too, so say goodbye for the fuel blocks too.
You should also use the Fuselage inlets instead of the normal one, they let you fully customize their appearance, but they only have connections on their back and front, instead of 6 like the normal tubes.