You might be placing it onto the hollow fuselage block of your aircraft body or canopy
Best bet is to place it on the outside, then nudge it where you need it and edit the connections manually
@Ded Supposedly added on to late F-104 C models :v
I mainly wanted an excuse to have a loadout with the tip tanks and missiles
@TheCommentaryGuy I once saw him kill 3 MiG's in a bar
@ShirakamiShimada lol
@Ded Yeah either the C or G. I definitely haven't seen a two seater yet. It seems like the USAF was testing the F-104C with nukes, so I'll probably add it.
@donkski I will
The wiki actually mentions this
Selatapura is heavily based off Singapore
Farbanti combines landmarks from Tokyo, Washington DC, Toronto, amd Los Angeles
Artiglio Port is also based on a port in Iran
Yaw while on the ground could be due to the suspension being too soft or the brakes not being strong enough.
If you're using a resizable wheel for the nose gear that may be an issue too. If that's the case, try using 2 mirrored resizable wheels in the same spot to create the illusion of one wheel.
If you're using suspension, see if you can use the resizable wheel's built in suspension, since its the most stable.
@FlyingPatriot Image manipulation =/= Coding
.
This would be an interesting feature. Sifting through the usernames of everyone who wants tags and then tagging them 3 at a time gets annoying.
.
Not sure if the upvotes section would be the best place to put the tags for posts though.
@CoolPeach Ooh okay. I'm guessing SenSkysh uses some weird imperfect way to approximate ballistics. Definitely a problem for naval guns
That must be why I had problems making my railgun work without proxy detonation
@CoolPeach When I used SenSkysh's with the cannon box checked for my AH-1G's 40mm it worked fine
Granted, I don't know what it's doing to calculate the bullet drop
It is possible! :)
There is also a way to add proximity detonation by calculating the time it takes for the shell to reach the target using distance and muzzle velocity. Guyfolk has FT for this on his Strike Wyvern if you want to try reverse-engineering it.
Oh hey I didn't think my posts would start getting grandchildren
Fun fact: If you want to mount AIM-9's to the pylon station 3/7, you need the small pylon (the same one on station 2/8) coupled with an LAU-128 rack. The medium and large size pylons aren't for missiles afaik.
The Room is a good (bad) movie for this
+1You might be placing it onto the hollow fuselage block of your aircraft body or canopy
+1Best bet is to place it on the outside, then nudge it where you need it and edit the connections manually
@Ded Supposedly added on to late F-104 C models :v
+1I mainly wanted an excuse to have a loadout with the tip tanks and missiles
@TheCommentaryGuy I once saw him kill 3 MiG's in a bar
@ShirakamiShimada lol
@Spitfirelad05
+1@CaptainSquadronLeaderX @Korzalerkle @OkaNieba
+1Sad Bombardier noise
+1Imagine the maintenance...
+1@Korzalerkle I want to say V5 is going to be the definitive version but I bet I thought the same thing since V3
+1Out of curiosity, do you watch Complete Walkaround? Your planes and his videos kinda have the same vibe going on
+1This would also save on part counts
+1Splash!
+1it fixd? :DDD
+1Jarate!
+1They're not too hard, but learning to fly them takes some practice.
+1(Coming from someone whose most realistic heli experience is Battlefield)
@SilverStar That's awesome! Which one?
+1Trijet but propellers?
+1@Sparky6004 Nice
+1The Pacific Coast Air Museum is also restoring an A-26 to flying condition.
@ColonelCanada
+1@Ded Yeah either the C or G. I definitely haven't seen a two seater yet. It seems like the USAF was testing the F-104C with nukes, so I'll probably add it.
+1@donkski I will
Fox 🗿🗿
+1The wiki actually mentions this
+1Selatapura is heavily based off Singapore
Farbanti combines landmarks from Tokyo, Washington DC, Toronto, amd Los Angeles
Artiglio Port is also based on a port in Iran
He flies a jaaaaaag
+1Panera tornado
+1@phrongus wait i just realized it has tricycle gear 💀
+1it is definitely a plane of some sort though
@Cir8 What's this?
+1@donkski No, that's for when you need to turn extremely tightly when taxiing on the deck.
+1@donkski when taking off, you should turn NWS high off
+1A pair of T-38's
+1Wait, it's ALL engine?
+1I suspect that the device depicted does, in fact, quantify the mass of objects.
+1@Farewellntchii Don't forget about missile length/diameter!
+1Nose style would be cool too.
It's alphabetical...
+1:o
+1@BobDaBilder123 Can you be more specific?
+1Yaw while on the ground could be due to the suspension being too soft or the brakes not being strong enough.
+1If you're using a resizable wheel for the nose gear that may be an issue too. If that's the case, try using 2 mirrored resizable wheels in the same spot to create the illusion of one wheel.
If you're using suspension, see if you can use the resizable wheel's built in suspension, since its the most stable.
@ssenmodnar If you want to use hinges, you can also build the doors closed and have them open when LandingGear=0
+1@FlyingPatriot Image manipulation =/= Coding
+1.
This would be an interesting feature. Sifting through the usernames of everyone who wants tags and then tagging them 3 at a time gets annoying.
.
Not sure if the upvotes section would be the best place to put the tags for posts though.
@IAlsoBuildPlane @MrCOPTY I was once saw him kill three men in a bar. With a pencil
+1What will the role of the aircraft be?
+1cardboard cardboard
+1b r a p
+1puts 300 BLK into a 5.56 AR
+1@CoolPeach Ooh okay. I'm guessing SenSkysh uses some weird imperfect way to approximate ballistics. Definitely a problem for naval guns
+1That must be why I had problems making my railgun work without proxy detonation
@CoolPeach When I used SenSkysh's with the cannon box checked for my AH-1G's 40mm it worked fine
+1Granted, I don't know what it's doing to calculate the bullet drop
It is possible! :)
+1There is also a way to add proximity detonation by calculating the time it takes for the shell to reach the target using distance and muzzle velocity. Guyfolk has FT for this on his Strike Wyvern if you want to try reverse-engineering it.
@HuskyDynamics01 13. Take it or leave it
+1Oh hey I didn't think my posts would start getting grandchildren
+1Fun fact: If you want to mount AIM-9's to the pylon station 3/7, you need the small pylon (the same one on station 2/8) coupled with an LAU-128 rack. The medium and large size pylons aren't for missiles afaik.
@asteroidbook345 The variable part is technically optional, but it makes the FT easier to access for later
+1What spreadsheet do you use?
shoot dang
+1It has 8 legs
+1