@LunarEclipseSP
I think it looks more like a Chevrolet Corvette than a Saleen S1.
And I think the rear is a Saleen S1 and the front is a Chevrolet Corvette.
@KSB24 Actually, the modeling of this Crinale was not precise... So I improved the modeling based on this Ai racer...
If there is a problem, I will remove it from my upload list...
Please reply if you like...
@BYardley thank you. It may certainly look like the Red Bull X1, but this car is a Ridge Racer machine.
In terms of performance, this may be a little faster...(lol)
Thank you again for turning it into an Ai racer...
I'm currently considering whether I can turn Kamata Angelus into an AI racer on my own...Could you please tell me the code for Ai Racer...? Please reply if you like...
@LunarEclipseSP I think Ridge Racer takes place in a world called "Ridge State" rather than "Strange Real"...The name of the Grand Prix of Ridge Racer 7 was written as "Ridge State Grand Prix (RSGP)", so I don't think so... However, Strange Real may have appeared briefly on the circuit...
@KSB24 Also, if possible, could you please turn BAT FANG into an AI racer too...?
I would like to have Rivelta Crinale VS BAT FANG fight at the same level, so please reply if you'd like...
If you don't mind, could you turn my Riverta Crinale into an AI racer...?
https://www.simpleplanes.com/a/eb6DXg/Rivelta-Crinale
Copy and search this link to become an AI racer...
It's actually related to Ridge Racer Type 4...
I gave up trying to make an anti-annihilation anti-gravity engine, so I started making a hybrid machine between a mini 4WD and a ridge racer.
@Ownedpilot That's true... next time I'll focus on one point.
To drift like a ridge racer, increase the values of slipForwardExtremum, slipForwardAsymptote, slipSidewaysExtremums and lipSidewaysAsymptote of Resizable Wheels in xml to make it behave like a drift.
Can you please remake 2025 Havoc Asterios?
The setting is the Havoc version of 2023 Sakura Eternity, but it is set as a circuit machine.
I have uploaded it, so please remake it.
@MasterPlanes101 We created a circuit machine called "Imperatone-400X" based on this machine. The setting is that it was created as a result of a partnership between Havoc and Airone S.p.A.
In addition to maximum speed, turning performance is also emphasized.
https://www.simpleplanes.com/a/0UnwSB/2025-Airone-S-p-A-Imperatone-400X
I was relieved to see that the reproducibility remained the same.
I will also try my best to surpass you, so I would appreciate it if you could watch over me kindly.
The night sky interior illumination is a difficult design task so we omitted it, but I think it can be made to move realistically by including a set with suspension and automatic gears.
I have uploaded this improved version with auto credits.
This is more than half a year of revenge.
Please note that this was uploaded privately.
https://www.simpleplanes.com/a/Snd49L/2024-Quebecor-V30-RM-10GT-LUX-RaceMonster
However, please set it to high physics when running.
@MasterPlanes101
Why not shrink it by one size or more and reconsider the weight?
The actual size of the vehicle is 4.7m in length, 2.2m in width (including door mirrors) and 1.1m in height.
The load capacity is about 1300kg, And adjust the suspension, it no longer rolls over.
If it still rolls over, try changing the grip of the front and rear tires and the width of the front wheels.
@L1nus I installed an anti-roll suspension on my Crinale, but I don't know if this method is correct.
I will upload it, so please let me know if you have any suggestions.
@L1nus This is a phenomenon that was only confirmed with low physics calculations, but when you turn, the meter will tilt in the same direction as the direction of travel, but in reality it tilts in the opposite direction like a real car. I don't know the cause of this phenomenon, but it should be slightly improved from the last time (although it may differ depending on the physics calculation...)
@LunarEclipseSP I feel like it's a combination of various hypercars such as Koenigsegg CCX and Pagani Huayra R rather than AMG Project ONE.
+1@LunarEclipseSP
+1I think it looks more like a Chevrolet Corvette than a Saleen S1.
And I think the rear is a Saleen S1 and the front is a Chevrolet Corvette.
Thank you for the remake...!
+1Thank you for making me an AI chaser...
+1@001 thank you.
+1@LunarEclipseSP It's true that it's based on the Testarossa, but the taillights are modern, but I think they're 180SX-style.
+1@KSB24 Actually, the modeling of this Crinale was not precise... So I improved the modeling based on this Ai racer...
+1If there is a problem, I will remove it from my upload list...
Please reply if you like...
@KSB24 Next, could you please turn Soldat Crinale 6 into an AI racer...?
+1Please reply if you like...
@LunarEclipseSP I think the original story is Lamborghini Veneno (rear spoiler) and Apollo IE (front face), so I can't help but think so.
+1@AF1 thank you…
+1@LJh1 Thank you very much...
+1@BYardley thank you. It may certainly look like the Red Bull X1, but this car is a Ridge Racer machine.
+1In terms of performance, this may be a little faster...(lol)
@001 thank you…!
+1@KSB24 yes
+1Thank you again for turning it into an Ai racer...
+1I'm currently considering whether I can turn Kamata Angelus into an AI racer on my own...Could you please tell me the code for Ai Racer...? Please reply if you like...
If you don't mind, could you please make Assoluto Pronzione into an AI racer?
+1Please reply if possible...
@LunarEclipseSP I think Ridge Racer takes place in a world called "Ridge State" rather than "Strange Real"...The name of the Grand Prix of Ridge Racer 7 was written as "Ridge State Grand Prix (RSGP)", so I don't think so... However, Strange Real may have appeared briefly on the circuit...
+1@DatMaluchGuy19 The area I live in was only shaken, so I'm fine...
+1@KSB24 Also, if possible, could you please turn BAT FANG into an AI racer too...?
+1I would like to have Rivelta Crinale VS BAT FANG fight at the same level, so please reply if you'd like...
@4444da Thank you for your comment.
+1I'll try making it a little heavier...
@KSB24 Thank you for creating an AI racer...
+1I think I can recreate Ridge Racer properly with this...
If you don't mind, could you turn my Riverta Crinale into an AI racer...?
+1https://www.simpleplanes.com/a/eb6DXg/Rivelta-Crinale
Copy and search this link to become an AI racer...
It's actually related to Ridge Racer Type 4...
+1I gave up trying to make an anti-annihilation anti-gravity engine, so I started making a hybrid machine between a mini 4WD and a ridge racer.
@Ownedpilot That's true... next time I'll focus on one point.
+1To drift like a ridge racer, increase the values of slipForwardExtremum, slipForwardAsymptote, slipSidewaysExtremums and lipSidewaysAsymptote of Resizable Wheels in xml to make it behave like a drift.
This is an arrangement work...
+1It was actually 800Km/h...
+1used by orbitron light
@LowtusF139
There's a reason for that.
This is to prevent rollover and improve turning performance.
And it has been made wider by request.
Here is the one with the width corrected
https://www.simpleplanes.com/a/R4fijC/2026-Airone-S-p-A-Stellato-410-Full-width-revised-version
@MasterPlanes101
Can you please remake 2025 Havoc Asterios?
The setting is the Havoc version of 2023 Sakura Eternity, but it is set as a circuit machine.
I have uploaded it, so please remake it.
https://www.simpleplanes.com/a/2EQpLe/2025-Havoc-Asterios
The price is set to not exceed $1 million.
@MasterPlanes101 We created a circuit machine called "Imperatone-400X" based on this machine. The setting is that it was created as a result of a partnership between Havoc and Airone S.p.A.
In addition to maximum speed, turning performance is also emphasized.
https://www.simpleplanes.com/a/0UnwSB/2025-Airone-S-p-A-Imperatone-400X
I was relieved to see that the reproducibility remained the same.
I will also try my best to surpass you, so I would appreciate it if you could watch over me kindly.
@Gastonplanes It's certainly similar, but Shining has the ability to teleport while Stellato doesn't.
The night sky interior illumination is a difficult design task so we omitted it, but I think it can be made to move realistically by including a set with suspension and automatic gears.
I have uploaded this improved version with auto credits.
This is more than half a year of revenge.
Please note that this was uploaded privately.
https://www.simpleplanes.com/a/Snd49L/2024-Quebecor-V30-RM-10GT-LUX-RaceMonster
However, please set it to high physics when running.
@ShinyGemsBro It's finished, so please take a look. https://www.simpleplanes.com/a/2ZYX57/2008-Ferrari-FXX-Evoluzione
Can I upload an improved version?
@MasterPlanes101
Why not shrink it by one size or more and reconsider the weight?
The actual size of the vehicle is 4.7m in length, 2.2m in width (including door mirrors) and 1.1m in height.
The load capacity is about 1300kg, And adjust the suspension, it no longer rolls over.
If it still rolls over, try changing the grip of the front and rear tires and the width of the front wheels.
@LunarEclipseSP https://www.simpleplanes.com/a/p6aZT4/LOLVO-Sunrise-W12
I found a problem, so I'll re-upload it.
Please change the windshield individually from "Glass-2" to "Glass-1"
@LunarEclipseSP The upload is complete, so please come and see it.
@L1nus I installed an anti-roll suspension on my Crinale, but I don't know if this method is correct.
I will upload it, so please let me know if you have any suggestions.
@LowtusF139 The design base seems to be NSX, so
I think it can't be helped
@L1nus Thank you very much.
@L1nus I would like to make something realistic and simple, so please help.
@L1nus Now that you mention it, that's true.
Prototype race cars almost never roll.
@L1nus Ah...
Are the springs and dampers too soft?
@L1nus I'm still learning about appearances.
It's difficult to balance appearance and performance, so please wait a little longer.
@L1nus This is a phenomenon that was only confirmed with low physics calculations, but when you turn, the meter will tilt in the same direction as the direction of travel, but in reality it tilts in the opposite direction like a real car. I don't know the cause of this phenomenon, but it should be slightly improved from the last time (although it may differ depending on the physics calculation...)