Love this plane!! So idk what's happening with it, but when I download it, it's not pulling to either side in the slightest. my suspicion is it might be an issue with the built saving, sometimes It'll spawn a random duplicate part somewhere in the plane and shift its CoM. Try downloading your upload here, then saving it as a different name.
@Boeing777x I did actually think that part thru this time. Assuming all economy config, she would carry up to 1,120 passengers, minimum of 10 flight crew persons, and minimum of 4 persons for operations including pilots, engineers and technicians. Im very happy you like this one!
Not sure if you're still seeking input under this thread after over 5 years, but imma go for it anyways. A lot of issues arise from those wings that can support control surfaces (horizontal and vertical stabilizer, primary wing) for the purpose of this comment, we can refer to those as primary wings. A lot of players, including myself, seldom use primary wings for a few reasons, most notably: they wobble like nobody's business, and control surfaces are far too responsive as in going from 0 to 100 instantly, resulting is erratic movements. Primary wing control surfaces can be finely tuned using the XML mod (I'm sure you probably have it, but if not, it's a must must must). You can precisely adjust the range of the aileron (how far it moves) and the speed at which it moves. I can elaborate on how to do this in a later comment if you wish.
@Boeing777x I built it imaging 3 seats to each window, separated by an isle, haven't thought it out exactly it terms of seat class and stuff but it would be a lot. Thank you, im glad you like it
I added a another set of primary wings (the ones that don't support control surfaces) to the wings already there, and nudged em down and out of sight, in hopes for a little extra wing lift. It worked for me.
@DaBoss123 I ask that you edit this craft to include the tag "Painted," to express that the only difference with this craft versus mine is the coloration. Thank you.
Interesting. Some instability during maneuvers and unstable when landing. A lot of potential here. I would adjust those rotators to turn at slower speeds; it will greatly increase your plane's stability in pitching maneuvers.
@Jdonnery Yeah, at first I had the horizontal stabilizers in the normal position near the vertical stabilizers, but at higher velocities they start to bounce around a bit until they break off and destroy the plane. So I went with using only rotators and structural wings since they are much stronger.
I would remove some of of the fuel from the back of the plane to move your center of mass (CoM) forward and to add to the plane's stability. Other than than, I like it.
Check out the refinished version here: https://www.simpleplanes.com/a/s77ZWn/A-24-A-F-22-Raptor-refinished
I adjusted the horizontal stabilizers to make flying a bit easier.
It has some instability, but I like it. I honestly think you could fix those slight issues. I would love to see these problems corrected! So much potential, and it is already pretty good. I love it!
Wow. Beautiful performance for a craft of its type. Incredibly fast, fuel efficient, and the rolling and pitching are excellent. I am surprised it maintained such stability even when rolling at that fast a pace. I love it!!!
@UltraAirForce1 I found that using large landing gear improved overall stability when landing, i.e. allows for errors to be compensated for when landing at a slight angle. Small landing gear may work just as well.
@DeezDucks This is very true, which is why the Americans needed to be flying planes that were a match for the Zero. All in all, the Zero was a formidable opponent against any prop fighter of WWII.
Here's a mod you may find intriguing to make. I'd like to have a micro-rotator. By this, I am speaking of something that can fold up a wing just like on a carrier-based fighter from WWII. If this can be done, that would be fantastic. Thanks!
I've been working on my own model, to near exact scale, but the wings are too weak to support the engines on my plane. I absolutely love your model. Great job!
Honestly, it does not matter to me whether or not this is a copy. What DOES matter, is that this Simple planes. If I could give a "Zero star rating" I would, but this will have to do.
•Minus all possible stars because it does not fly!
@Boeing777x I appreciate it. Not as big or fast as the last one, certainly not a tripple-decker, but I had a lot of fun making this one.
Okay, now this one I gotta save to play around with. An amazing bird!
@Sergio666 It was truly my pleasure, wonderful build.
Love this plane!! So idk what's happening with it, but when I download it, it's not pulling to either side in the slightest. my suspicion is it might be an issue with the built saving, sometimes It'll spawn a random duplicate part somewhere in the plane and shift its CoM. Try downloading your upload here, then saving it as a different name.
@Boeing777x now that you gave me the thought, definitely yes. My imagination is running wild now.
@Boeing777x I did actually think that part thru this time. Assuming all economy config, she would carry up to 1,120 passengers, minimum of 10 flight crew persons, and minimum of 4 persons for operations including pilots, engineers and technicians. Im very happy you like this one!
Not sure if you're still seeking input under this thread after over 5 years, but imma go for it anyways. A lot of issues arise from those wings that can support control surfaces (horizontal and vertical stabilizer, primary wing) for the purpose of this comment, we can refer to those as primary wings. A lot of players, including myself, seldom use primary wings for a few reasons, most notably: they wobble like nobody's business, and control surfaces are far too responsive as in going from 0 to 100 instantly, resulting is erratic movements. Primary wing control surfaces can be finely tuned using the XML mod (I'm sure you probably have it, but if not, it's a must must must). You can precisely adjust the range of the aileron (how far it moves) and the speed at which it moves. I can elaborate on how to do this in a later comment if you wish.
Its a rather nice tonk
@Boeing777x I built it imaging 3 seats to each window, separated by an isle, haven't thought it out exactly it terms of seat class and stuff but it would be a lot. Thank you, im glad you like it
@Erc90F4RU here is my progress so far.
The instructions are super helpful
Nice bird, definitely saving this one
Now thats a sexy bird. Flies good too I like it
Beautiful build!
I added a another set of primary wings (the ones that don't support control surfaces) to the wings already there, and nudged em down and out of sight, in hopes for a little extra wing lift. It worked for me.
Love the smoothness of her, phycally and in flight
@Makcoink Thank you! I am glad you like it.
@DaBoss123 I ask that you edit this craft to include the tag "Painted," to express that the only difference with this craft versus mine is the coloration. Thank you.
Interesting. Some instability during maneuvers and unstable when landing. A lot of potential here. I would adjust those rotators to turn at slower speeds; it will greatly increase your plane's stability in pitching maneuvers.
This will do very well. Thank you very much for your time with modding this part!
@BritishNarwhal Well I am still very impressed!
Very wonderful design!
Difficult for me to be able to fly. Just not my style. But I like it. Amazing that you made a working helicopter!!
Wonderful! It looks nearly historically accurate, very nice stability. Congrats!
@Legosail That would be great as well!
@Jdonnery Yeah, at first I had the horizontal stabilizers in the normal position near the vertical stabilizers, but at higher velocities they start to bounce around a bit until they break off and destroy the plane. So I went with using only rotators and structural wings since they are much stronger.
Quite stable and agile. Very nice.
Well, it definitely beats my gray and boring version haha! Nice coloration.
I would remove some of of the fuel from the back of the plane to move your center of mass (CoM) forward and to add to the plane's stability. Other than than, I like it.
Check out the refinished version here: https://www.simpleplanes.com/a/s77ZWn/A-24-A-F-22-Raptor-refinished
I adjusted the horizontal stabilizers to make flying a bit easier.
Not this again... he we go.
Oh I see. Now I feel like a moron. Thanks for enjoying the plane!
@xXMysticMew2Xx First? Is that good or bad? I do not understand what you mean.
Good to know! Thanks :)
It has some instability, but I like it. I honestly think you could fix those slight issues. I would love to see these problems corrected! So much potential, and it is already pretty good. I love it!
How did you get the fuselages to get so small?
Cool! I love the concept you've got going on with this.
I noticed a very interesting difference in stability; at higher speeds, it gains some stability. Easy to land (I like that). I like it!
Wow. Beautiful performance for a craft of its type. Incredibly fast, fuel efficient, and the rolling and pitching are excellent. I am surprised it maintained such stability even when rolling at that fast a pace. I love it!!!
Here's something that would be very helpful: I would be very grateful in you could mod a Medium Engine to not require any air intake. Thanks!
@UltraAirForce1 I found that using large landing gear improved overall stability when landing, i.e. allows for errors to be compensated for when landing at a slight angle. Small landing gear may work just as well.
@DeezDucks This is very true, which is why the Americans needed to be flying planes that were a match for the Zero. All in all, the Zero was a formidable opponent against any prop fighter of WWII.
Here's a mod you may find intriguing to make. I'd like to have a micro-rotator. By this, I am speaking of something that can fold up a wing just like on a carrier-based fighter from WWII. If this can be done, that would be fantastic. Thanks!
I've come to a dead end! Once you download the file, how do you make it open in simpleplanes or whatever needs to happen for it to work?
@TaylorWatson12 Hey, great idea with the VTOL engines. You should upload it!
Thank you! It was the goal to give it such an appearance. @DeezDucks
Thank you! I'm surprised at that as well. I was only going for looks, not stability.@Stingray
I've been working on my own model, to near exact scale, but the wings are too weak to support the engines on my plane. I absolutely love your model. Great job!
Honestly, it does not matter to me whether or not this is a copy. What DOES matter, is that this Simple planes. If I could give a "Zero star rating" I would, but this will have to do. •Minus all possible stars because it does not fly!
Very interesting!! A full five stars! Lifts off very fast, incredibly stable in mid-flight, and an unprecedented concept. Beautiful!