@XEPOH piston and brake can become somewhat propeller?
also i wasn't intended to remove the propeller,
i want to use one, but one generates torque,to negate the torque i used second one...
“This increases the damper. This is very useful for rotators that wobble when you move them. To remove wobble, increase this in powers of 10 (10,100,1000) until it stops wobbling. Too much damper will cause it to rotate too slowly.”
@PlaneFlightX it was supposed to stayed at that square thing in the label part, above and below that i want to make invisible
like normal typing, if the square doesn't fit, the text cropped.
but its just go out the text square limit?
@Dracul0Anderson vertical speed?
heres what i know
since rate(Altitude) is the rate of change the altitude in m/s, positive for going up,and vice versa
.
i use rate(Altitude*3.2808)*60 to get the Vs in ft/min
to regulate it <-? Pitch!=0? PID(-1000*Pitch,rate(Altitude*3.2808)*60,1,0,0)/1000 : 0
so if pitch full up(Pitch=1) and the target is (1*-1000) 1000ft/min
the /1000 part is just because the result will be 1 if the vertical speed is 0
i am not very good at calculating the PID, i just only know to use the P part,
@DrakesDragger thak you very much!!!
so ill keep that size from now on 😁
so, in vr, the camera is not limited to rotation?
so beside you can see rotator, the hud didnt follow too??
i never knew that!
imma try to get a workaround, i dont know how tho...yet
@DrakesDragger thank you!
still working on it,
but i dont know if you mind i have this tagged vr
but im not sure if the buttons and hud are too big or small
oooo awesome! thanks!
one wing????
how does it split?
@airlinerbuilder giat guy 😂
+1@WzNick yes!!
hahahaha the car maybe good,gas still better
but still just like plastic, gas is also have ups and downs
@XEPOH piston and brake can become somewhat propeller?
also i wasn't intended to remove the propeller,
i want to use one, but one generates torque,to negate the torque i used second one...
@XEPOH i cant see the method you are talking about, and i dont understand how to fly it
removed
+1hehehe i was just kidding 🤣
this is just advertisement @Graingy @YarisHatchback
are you still cannot download?
+1nice one!
@JBPAviation thanks for the info!
+1@JBPAviation wait... i can lower maxrpm? so blades spin slower?????
all this time i thought it was the max rpm of the blade before it breaks
i think it will.. maybe
+1just anchoring problem... may be solved by putting so much weight on it
im not sure
i think its easier if the rotator only start from 0 to 1, rather -1 to 1, so it cant go down..
but if you want to use pitchAngle just add
with x is rotator angle range
@Bestkub555 i did, upvoted too
+1Quoted from WNP78:
“This increases the damper. This is very useful for rotators that wobble when you move them. To remove wobble, increase this in powers of 10 (10,100,1000) until it stops wobbling. Too much damper will cause it to rotate too slowly.”
sorry late reply
@HungrySu34
https://docs.google.com/document/u/0/d/e/2PACX-1vRaoCHndg9exQh4sw5Re88dR2TmR3YeLQdLbNL8sg-W-CuK7lL65iMlqpoNUjVLXbPxk5TdAdlmWRyV/pub?pli=1
i found that, the joint rotator does wobble
but adding
damperMultiplierby 10000 kinda make it better, but make the nozzle slow.
so, either adding damper multiplier, and increase speed a little.
or, i think its better to change to rotator thats safer
is there a video? or can i see
@HungrySu34 then try give the rotator mass back?
i thought it was clickable,
@HungrySu34 wobble from the hinge?
did you re-scale mass ? or set 0 mass?
@Subsere i was want to help but i wasnt understand the question .
also when i see, you was already solved it
hehe
noone helped lol
good one tho
@Dracul0Anderson awesome!!
TAG
+1or button clicker? add and subtract,
or a switch output the max Vs ?
btw have you tried it? i think theres some error idk where tho
@Dracul0Anderson i edited
-1000*Pitchits already adjusted? for 1000ft/min
if you want 3000ft/min just
-3000*Pitchso half pitch is 1500ft/min
:v kumaha damang wa
hawa hawa depok/bogor/tanggerang
oh, hehee i didnt knew it was clickable
+1@PlaneFlightX tysm!
heres unlisted plane
images didnt load for me
+1hhaahaa
+1do you need to see? i think you absolutely can fix this 😅
@PlaneFlightX it was supposed to stayed at that square thing in the label part, above and below that i want to make invisible
like normal typing, if the square doesn't fit, the text cropped.
but its just go out the text square limit?
still needs clamp,-1,1
or i was misunderstood what the question is?
@Dracul0Anderson vertical speed?
heres what i know
since
rate(Altitude)is the rate of change the altitude in m/s, positive for going up,and vice versa.
i use
rate(Altitude*3.2808)*60to get the Vs in ft/minto regulate it <-?
Pitch!=0? PID(-1000*Pitch,rate(Altitude*3.2808)*60,1,0,0)/1000 : 0so if pitch full up(Pitch=1) and the target is (1*-1000) 1000ft/min
the /1000 part is just because the result will be 1 if the vertical speed is 0
i am not very good at calculating the PID, i just only know to use the P part,
@UnitedinOne90 😂
+1i was searched and found the meme, i thought it was that.
tysm !
@DrakesDragger oh yes, theres no position variables sadly..
thank you so much for the info!! 😁
@PlaneFlightX yes i do, every new section
is it different than VS?
@UnitedinOne90 i dont understand but im laughing 😅
+1the grip is gripping too right?
there was a problem, the grip wasnt touchable
@DrakesDragger thak you very much!!!
so ill keep that size from now on 😁
so, in vr, the camera is not limited to rotation?
so beside you can see rotator, the hud didnt follow too??
i never knew that!
imma try to get a workaround, i dont know how tho...yet
nice car
i made and play on mobile, if that cockpit is at least okay, ill use it as reference.
@DrakesDragger thank you!
still working on it,
but i dont know if you mind
i have this tagged vr
but im not sure if the buttons and hud are too big or small
how about testing cockpit?
i was wondering if the vr version has a lot of difference than the screen one,
mainly because im on mobile.
what usually off from cockpits in vr
ouch, the landing gear hitting my nut
nice craft tho