hm, you can upload this as “unlisted”, which means it won’t be public to anyone except people who have the link. That way you don’t spoil anything or end up with weird public builds like these where the picture makes no sense @DCXsge
Since deployment, the first two carriers of the class have run into problems with the plumbing of the waste system. The pipes were too narrow to handle the load of users, resulting in the vacuum failing and repeatedly clogged toilets.[52] To alleviate the problem, specialized acidic cleaning solutions have been used to flush out the sewage system. These cleaning treatments cost about $400,000 each time, resulting in a substantial unplanned increase in the lifetime expense of operating these ships according to the GAO. These cleanings will have to be performed for the lifetime of the ship.[52]
The comment you have just posted is not visible anymore.
Why did you do this?
There are several reasons I may deem a comment to be unworthy of existence. These include, but are not limited to:
Rudeness towards other users,
Spreading incorrect information,
Sarcasm not correctly flagged with a /s.
Am I banned from the Simpleplanes?
No - not yet. But you should refrain from making comments like this in the future. Otherwise I will be forced to issue an additional removal, which may put your commenting and posting privileges in jeopardy.
I don't believe my comment deserved a removal. Can you un-remove it?
Sure, mistakes happen. But only in exceedingly rare circumstances will I undo a removal. If you would like to issue an appeal, shoot me a private message explaining what I got wrong. I tend to respond to Discord PMs within several minutes. Do note, however, that over 99.9% of removal appeals are rejected, and yours is likely no exception.
How can I prevent this from happening in the future?
Accept the removal and move on. But learn from this mistake: your behavior will not be tolerated on Simpleplanes.com. I will continue to issue removals until you improve your conduct. Remember: Simpleplanes is a privilege, not a right.
The comment you have just posted is not visible anymore.
Why did you do this?
There are several reasons I may deem a comment to be unworthy of existence. These include, but are not limited to:
Rudeness towards other users,
Spreading incorrect information,
Sarcasm not correctly flagged with a /s.
Am I banned from the Simpleplanes?
No - not yet. But you should refrain from making comments like this in the future. Otherwise I will be forced to issue an additional removal, which may put your commenting and posting privileges in jeopardy.
I don't believe my comment deserved a removal. Can you un-remove it?
Sure, mistakes happen. But only in exceedingly rare circumstances will I undo a removal. If you would like to issue an appeal, shoot me a private message explaining what I got wrong. I tend to respond to Discord PMs within several minutes. Do note, however, that over 99.9% of removal appeals are rejected, and yours is likely no exception.
How can I prevent this from happening in the future?
Accept the removal and move on. But learn from this mistake: your behavior will not be tolerated on Simpleplanes.com. I will continue to issue removals until you improve your conduct. Remember: Simpleplanes is a privilege, not a right.
@jamesPLANESii
1) Yes, the more effects you stack, especially on a weak card, the more the toll on your FPS is. However, pictures don't need FPS if you want to use it for that
2) It does, but you can turn on and off reshade as you like (only turn it on when you're in a picture pose)
I've changed settings and gotten rid of the eye explosion of white from the last ReShade video. I think it's good enough that you can try it out yourself.
Thank you to Sodium for the Zero, it is used with his permission.
How to Install Reshade:
1) Download the latest version from here.
2) Open the installer
3) Select Simpleplanes
4) Choose DX10/11/12
5) Install the first 8 shaderpacks (you can get more if you want)
6) Put my settings file in your Simpleplanes folder (not the appdata one, but the one in steam). You will know if you got the right one if you see the reshade folders in there
7) Open SP, if you did it right there will be a built-in reshade tutorial. Follow it and then open my preset file. The big thing you can adjust is the blur - normally I wouldn't use it much unless you were going for a cockpit view, then you could have more of the blur. The blur component is the very last one
8) Have fun, and comment any changes etc. you would like to the reshade pack
TIP: Home opens the Reshade menu.
I have seen some suspiciously blurry builds on this site. Make sure to use a respectable amount, not one that leaves the figure of the plane to our imagination
"Core" GIS Components
I believe these settings synergize with the GIS mods pretty well, but there are also many other effects as well such as vignette for a more cinematic experience. If you are using these with GIS mods and would like a GPU break or removal of cinematic effects, the most important effects to bring out the GIS map textures are the two sharpen effects and the HDR effect.
BEFORE YOU SUE ME
Let's say you make a doo doo and accidentally instal the DX9 or Vulkan drivers instead of DX10/11/12 like you were supposed to. SP will not run. The uninstall is easy. Open up the installer again ,click SP, and click the incorrect graphics version that you installed. Then it will prompt you if you want to uninstall it.
I am running an RX580 and soy's Zero is 4,000 parts background music
123 - seizure
213 - explode
312 - good, depends on timing though
132 - good, depends on timing though
231 - good or explode, depends on timing
321 - good but not as good as 132
12 - boring
13 - cool
21 - boring ish
23 - good
31 - same as 13 but timing matters
32 - same as 3
1 - cool
2 - disappointing, what do you mean it's
3 - best feature
I did not try it out poo poo head
Dude, looks like the J-20 which is a copy of the F-22.
Look, next time just upload 1 final version instead of multiple versions.
Dude, these cockpits suck
Three freakin versions? I wish there was a downvote button.
The cockpit isn't really realistic. >:(
I don't really like the orange paint...
Normal wings aren't this thin.
A
if you block me I won't upvote
@zhunnanohhhh Android 1.9 compatible!
@DuckDuckTheMint a
@DuckDuckTheMint .obj
@DuckDuckTheMint WTF
wait, I don't have to build out of blocks?
+1the weird thought is the 2nd image could be a thumbnail on the site... and then it would attract attention/make everyone mad
cringe @BuiltBionixInd10
Yes. That is intentional. @Zokowi
Sorry, what server? @Zokowi
Please send me a friend request at NumbersNumbersTheMan#6844. I am on almost 40 Simpleplanes discord servers so it should be easy to find me. @Zokowi
video or forum or discord DM @Zokowi
yes @Aldriech
dude, I will try this out
gotcha, I will not use da rudd
@Zokowi custom paint
someday he will find the backwards camera button
@Mattangi2 give me my 50 dollars steam please
@XxVirginMary42069xX
a top 10 indeed
@SodiumChloride
hm, you can upload this as “unlisted”, which means it won’t be public to anyone except people who have the link. That way you don’t spoil anything or end up with weird public builds like these where the picture makes no sense @DCXsge
did you mean to upload this?
sodyum 2
this will be helpful for utilizing the most out of SimpleplanesReflection
and thank you, as always, for making this mod open-source
where are you
Since deployment, the first two carriers of the class have run into problems with the plumbing of the waste system. The pipes were too narrow to handle the load of users, resulting in the vacuum failing and repeatedly clogged toilets.[52] To alleviate the problem, specialized acidic cleaning solutions have been used to flush out the sewage system. These cleaning treatments cost about $400,000 each time, resulting in a substantial unplanned increase in the lifetime expense of operating these ships according to the GAO. These cleanings will have to be performed for the lifetime of the ship.[52]
+3no
this will never be updated anyways
@Aeromotive
Great ball heli!
we no
this isn’t SPBC@SodiumChloride
134279178232287168147825
@DixionCider
I just removed your comment.
FAQ
What does this mean?
Why did you do this?
Am I banned from the Simpleplanes?
I don't believe my comment deserved a removal. Can you un-remove it?
How can I prevent this from happening in the future?
Sodium said to remove your comment, I'm sorry.
@SodiumChloride
I just removed your comment.
FAQ
What does this mean?
Why did you do this?
Am I banned from the Simpleplanes?
I don't believe my comment deserved a removal. Can you un-remove it?
How can I prevent this from happening in the future?
Also thanks for the feedback
@jamesPLANESii
1) Yes, the more effects you stack, especially on a weak card, the more the toll on your FPS is. However, pictures don't need FPS if you want to use it for that
2) It does, but you can turn on and off reshade as you like (only turn it on when you're in a picture pose)
I've changed settings and gotten rid of the eye explosion of white from the last ReShade video. I think it's good enough that you can try it out yourself.
Thank you to Sodium for the Zero, it is used with his permission.
The map used is Annapurna, the flagship of my mods. This pack hopes to increase the detail and effects of these maps.
You can download it here, but be warned, it is 600mb.
I want you guys to try out my settings so I can get some feedback:
A link to my Reshade Settings to download
How to Install Reshade:
1) Download the latest version from here.
2) Open the installer
3) Select Simpleplanes
4) Choose DX10/11/12
5) Install the first 8 shaderpacks (you can get more if you want)
6) Put my settings file in your Simpleplanes folder (not the appdata one, but the one in steam). You will know if you got the right one if you see the reshade folders in there
7) Open SP, if you did it right there will be a built-in reshade tutorial. Follow it and then open my preset file. The big thing you can adjust is the blur - normally I wouldn't use it much unless you were going for a cockpit view, then you could have more of the blur. The blur component is the very last one
8) Have fun, and comment any changes etc. you would like to the reshade pack
TIP: Home opens the Reshade menu.
I have seen some suspiciously blurry builds on this site. Make sure to use a respectable amount, not one that leaves the figure of the plane to our imagination
"Core" GIS Components
I believe these settings synergize with the GIS mods pretty well, but there are also many other effects as well such as vignette for a more cinematic experience. If you are using these with GIS mods and would like a GPU break or removal of cinematic effects, the most important effects to bring out the GIS map textures are the two sharpen effects and the HDR effect.
BEFORE YOU SUE ME
Let's say you make a doo doo and accidentally instal the DX9 or Vulkan drivers instead of DX10/11/12 like you were supposed to. SP will not run. The uninstall is easy. Open up the installer again ,click SP, and click the incorrect graphics version that you installed. Then it will prompt you if you want to uninstall it.
I am running an RX580 and soy's Zero is 4,000 parts
background music
@wonkapilot ford bronco by dllama
Free Cam Activate Windows
thank you mattangi, very cool!
ok
+3123 - seizure
213 - explode
312 - good, depends on timing though
132 - good, depends on timing though
231 - good or explode, depends on timing
321 - good but not as good as 132
12 - boring
13 - cool
21 - boring ish
23 - good
31 - same as 13 but timing matters
32 - same as 3
1 - cool
2 - disappointing, what do you mean it's
3 - best feature
not a train or a train map 0/10
+12