Amazing, absolutely amazing! The livery is spot on and insanely cool, plus the cockpit is a very cool experience. The rotary engine and the custom prop is the cherry on top, that must've took hours to make lol. Wings and engine cowling are super smooth which make me happy. Only little thing I recommend is to put damperMultiplier on the rotators for the control surfaces. They are quite lurchy and realistically, the pilot would ease in and out of maneuvers. In the JointRotator section, put damperMultiplieron the left and put 10000 on the right. You can change this value to your liking
This is fantastic! I love the attention to detail, especially all the equipment in the back and the computer in the front. I can't wait to see what you have in store next!
Nicely done! The small details are a nice touch, and the livery is very cool! Only thing I would say is to be mindful of the scale. In reality, this plane has a 30ft wingspan, yet this has 50ft. Not that big of an issue, it just feels a little big. Other than that though, you did an outstanding job
Oh. I tested the Stuka on the ground and saw that only the tabs moved, not the elevator nor a combination of both. Again my bad. Also thanks, I really appreciate that @BogdanX
Thanks for your feedback. As for spawning, that has to do with the altimeter and air speed indicator suddenly catching up. As for the trim tabs, I remember asking you how they worked, to which you said they functioned the same way on your Stuka. Thus I copied that. However I do agree with your other points, I should have spent more time fixing those little things @BogdanX
Nice! I first saw this and thought it was a replica of some experimental aircraft, but then I looked a little closer and saw it was fictional lol. Great plane, I love the inlet design
That is true. What I found works well is adding mass to the rotator, as well as the part its connected too (the non rotating part) and set everything that is being rotated to 0 mass. Though this isn't always applicable @asteroidbook345
Hey, do you mind if I borrow the part of the livery in front of the canopy? I'm making an F-4J Phantom in a Blue Angels livery and this is the best one I could find
Amazing work! It so hard to pick a favorite aspect, so I'll just list a few. The paint chips are very unique; they add a good sense of age and use. The gear sequencing is very cool, I like how it stutters, for a lack of a better word. Also the tail separating mechanism is wonderful, it gives a further sense of realism. Bravo!
Awesome job! I think this is one of your most detailed planes lol. Only thing I would recommend is to add some shiny-ness to the paint, especially the canopy.
No what I'm saying is that once I fire all of a weapon (one on each side of fuselage), say the AIM7, it rolls despite the fact its balanced on both sides @ChiChiWerx
I noticed a slight issue when firing the missiles I built, @ChiChiWerx . Whenever I fire some of the weapons, but not all, there becomes an autoroll. Idk how to fix this
The F-4C phantom. The best I could find were max ranges and speeds, but apart from that nothing. If we can’t find more than that, it’s not that much of an issue. I’ll just make the missile’s performance plausible @ChiChiWerx
Sorry to bother you, but I need some help on the AIM-9B and AIM-7D missiles. More specifically, the max and min range and lock time, as well as the maneuverability of both
Awesome job! The attention to detail is superb. I love how you recreated the pilots experiences though the low FOV, buffeting, and accurate cockpit. Landing gear is done exceptionally well; very smooth and the suspension absorbs the hardest of landings. Shockcone movement is certainly interesting, it's amazing you were able to replicate it. I can't wait to see what you have in store next!
@EternalDarkness
A user named JakeKenth made a repost of the 599 part version. He asked for permission in which I denied, and yet he still posted it. I hate to bother you, but I would like this dealt with please
Great job! I love the details and the ordinance; this really packs a punch!
Oh ok, that’s understandable @Hedero
Amazing, absolutely amazing! The livery is spot on and insanely cool, plus the cockpit is a very cool experience. The rotary engine and the custom prop is the cherry on top, that must've took hours to make lol. Wings and engine cowling are super smooth which make me happy. Only little thing I recommend is to put
+1damperMultiplieron the rotators for the control surfaces. They are quite lurchy and realistically, the pilot would ease in and out of maneuvers. In the JointRotator section, putdamperMultiplieron the left and put10000on the right. You can change this value to your likingSounds good! I look forward to trying them out lol @TheSavageManZ
Awesome job! The attention to detail is amazing
This is fantastic! I love the attention to detail, especially all the equipment in the back and the computer in the front. I can't wait to see what you have in store next!
Nicely done! The small details are a nice touch, and the livery is very cool! Only thing I would say is to be mindful of the scale. In reality, this plane has a 30ft wingspan, yet this has 50ft. Not that big of an issue, it just feels a little big. Other than that though, you did an outstanding job
Very cool! It looks like someone bumped the nose against a wall lol
Great job as always!
Neat!
Oh. I tested the Stuka on the ground and saw that only the tabs moved, not the elevator nor a combination of both. Again my bad. Also thanks, I really appreciate that @BogdanX
Thanks for your feedback. As for spawning, that has to do with the altimeter and air speed indicator suddenly catching up. As for the trim tabs, I remember asking you how they worked, to which you said they functioned the same way on your Stuka. Thus I copied that. However I do agree with your other points, I should have spent more time fixing those little things @BogdanX
Nice! I first saw this and thought it was a replica of some experimental aircraft, but then I looked a little closer and saw it was fictional lol. Great plane, I love the inlet design
+1Nice! The gear is very smooth, and the cockpit adds a nice touch. Its a little too maneuverable at high speeds, but other than that its a great plane!
Lookin good! @ChrisPy
That is true. What I found works well is adding mass to the rotator, as well as the part its connected too (the non rotating part) and set everything that is being rotated to 0 mass. Though this isn't always applicable @asteroidbook345
Someone put a red sock in the wash lol
+6Thank you very much! I will be sure to credit you @Marine
+1I agree. This is why I like to use the Small Rotators, because you can rotate them on the Z axis and since they are circular, it follows the same path
+1Hey, do you mind if I borrow the part of the livery in front of the canopy? I'm making an F-4J Phantom in a Blue Angels livery and this is the best one I could find
Amazing work! It so hard to pick a favorite aspect, so I'll just list a few. The paint chips are very unique; they add a good sense of age and use. The gear sequencing is very cool, I like how it stutters, for a lack of a better word. Also the tail separating mechanism is wonderful, it gives a further sense of realism. Bravo!
+1Id say 5 or 6. 5 gives off a vintage/aged look, but 6 give a feeling of high performance.
I didn't notice anything, I think it looks pretty nice. @Hedero
Its been quite a while since I've seen one of these, especially one this good! IMO this is the best P-40 on the site
Indeed! @SledDriver
+1I can’t remember if I suggested this to you or your brother before, but maybe the XF-12 Rainbow? If not that, then maybe a B-25 @Diloph
Awesome job my dude! Seeing a modern jet from you is certainly a pleasant surprise!
Very cool! A little sensitive on the pitch axis, but overall you did a great job
Cool! Reminds me a little of a parasite fighter with its wings swept, but a stock SP plane with its wings extended lol
+1No problem! It’s all about finding the right mix of contrast and visual appearances
Awesome job! I think this is one of your most detailed planes lol. Only thing I would recommend is to add some shiny-ness to the paint, especially the canopy.
It doesn't seem to be doing it now, I think it was just a glitch @ChiChiWerx
No what I'm saying is that once I fire all of a weapon (one on each side of fuselage), say the AIM7, it rolls despite the fact its balanced on both sides @ChiChiWerx
I noticed a slight issue when firing the missiles I built, @ChiChiWerx . Whenever I fire some of the weapons, but not all, there becomes an autoroll. Idk how to fix this
Thank you! The SimpleCheats page isn't up to date lol @BogdanX
Sorry to bother you, but do you have any idea? @BogdanX
The F-4C phantom. The best I could find were max ranges and speeds, but apart from that nothing. If we can’t find more than that, it’s not that much of an issue. I’ll just make the missile’s performance plausible @ChiChiWerx
Sorry to bother you, but I need some help on the AIM-9B and AIM-7D missiles. More specifically, the max and min range and lock time, as well as the maneuverability of both
I would have to say the bad guys. Just the dark color tones and the fact looks a little like a tie fighter@SledDriver
Nice! It gives off that "mothership" kinda vibe
Nice!
Awesome job! The attention to detail is superb. I love how you recreated the pilots experiences though the low FOV, buffeting, and accurate cockpit. Landing gear is done exceptionally well; very smooth and the suspension absorbs the hardest of landings. Shockcone movement is certainly interesting, it's amazing you were able to replicate it. I can't wait to see what you have in store next!
+1Sweet! I think is is one of your best cockpits to date
Cool! The paint job is spot on, and the door is a nice touch
Lookin awesome! I can’t wait to try it out
@EternalDarkness
A user named JakeKenth made a repost of the 599 part version. He asked for permission in which I denied, and yet he still posted it. I hate to bother you, but I would like this dealt with please
Nicely done! I’m glad to see another build from you
+1Cool! Very useful
Yep, I believe so @wonkapilot
ah yes @MrSilverWolf