This is cool! However, it doesn't really handle like a real F1 car, real F1 cars actually have more grip at higher speeds, and don't spin out at 140+ mph. Adding wing pieces with flatbottom selected on the fuselages that are supposed to be aero bits would really help with this, as well as lowering the turning angle of the front wheels :)
Some Tips:
.
1. When you're making an aero kit, make the rear wing out of actual wing pieces, and angle it downwards a bit, setting the airfoil to flatbottom. This adds downforce, and helps the car steer. Do the same with the canards on this car, angle them downward, and make them curve up a bit with the X or Z axis. That will help your frontal downforce, and make the car turn better at high speeds. This way, your car may be marginally slower on the high end, but for racing, it'll corner better and accelerate better.
.
2. The front wheels should have a little more sideways traction than the back ones, but not by too much. Usually 10-20% more is all you need. That'll help you turn better.
.
3. Scale the car to real life size... please... most cars are 6-7ft wide and 15ish ft long, especially a GT3 car, they're usually pretty "short" in a sense.
.
4. Also, make sure you use the structural wings :)
@jamesPLANESii I've tried it... put 6 of the towers 2001 memorial together and pressed f10, lots of explosions and my pc got hot, but it didn't lag too hard😂
@TheDepressedPig yeah I had to add weight and aero to the front to compensate for that... and the front wheels only go up to 0.1 max power, so it's really not horrible, since the back wheels have 0.5 max.
@WeSeekANARCHY you can enter anything as long as it's a car :)
+1@PlanesOfOld I got featured for the 1st time and got like 40 upvotes, but my regular builds are only getting a third of what they used to...
@MrDoolittle I wonder how long it will take people to make a multilayer mod for SR2...
@randomusername what even xD
+1@randomusername xD
+1But yeah, trying to make a race competition
@randomusername xD GT3 is a racecar class
+1This is cool! However, it doesn't really handle like a real F1 car, real F1 cars actually have more grip at higher speeds, and don't spin out at 140+ mph. Adding wing pieces with
+4flatbottomselected on the fuselages that are supposed to be aero bits would really help with this, as well as lowering the turning angle of the front wheels :)@WeSeekANARCHY or, lower the angle that the wheels can turn ;)
@TimeTraveler it's more about other body lines besides the curves unfortunately, I tried, but it just looked like a potato
Some Tips:
+5.
1. When you're making an aero kit, make the rear wing out of actual wing pieces, and angle it downwards a bit, setting the airfoil to
flatbottom. This adds downforce, and helps the car steer. Do the same with the canards on this car, angle them downward, and make them curve up a bit with the X or Z axis. That will help your frontal downforce, and make the car turn better at high speeds. This way, your car may be marginally slower on the high end, but for racing, it'll corner better and accelerate better..
2. The front wheels should have a little more sideways traction than the back ones, but not by too much. Usually 10-20% more is all you need. That'll help you turn better.
.
3. Scale the car to real life size... please... most cars are 6-7ft wide and 15ish ft long, especially a GT3 car, they're usually pretty "short" in a sense.
.
4. Also, make sure you use the structural wings :)
upvoting
@jamesPLANESii yeah, I was going to do that, but then everything kept breaking... and what's with the video?😂
@StallFlight oh man... that's a good one xD
@GritAerospaceSolutionsLTD YUSSS
@ThomasRoderick that's the point, I race people down wright in multiplayer all the time xD
+1@ThomasRoderick it's a forced-induction V8 with 2 turbos...
@AWESOMENESS360 xD
@ThomasRoderick xD... check the new one :D
@RailfanEthan it took a LONG time to get it to stop spinning out every time I turned the car at over 10mph... xD
But thanks!
@RailfanEthan @Delphinos
EEEEEEEEEEEKK thanks for the spotlights :)
@RailfanEthan claps hands to mouth
OHHHHHHHHHHHHHHH
@Delphinos I'm aiming for under 200 :)
@WeSeekANARCHY Well I got the original idea for the winglets from that, and then I changed it a bit to fit with the existing wing
+1@Delphinos thanks! I think I'll upload an unlisted one for mobile users :)
@ThePrototype oof xD
@Delphinos @FastDan
+1@ThePrototype awe why not?
@tsampoy Samsung does it too
spelled
@connor2001 that's what the last one I posted was supposed to be, this one is mostly the same body, but with a hybrid system like a Regera
@WeSeekANARCHY I put them in discord then use that link
@small1324 I can't believe your mobile device can handle the car xD
Interesting
@WeSeekANARCHY THAT'S my favorite koenigsegg, or at least a CCX... that's more attainable for me than an agera rs
+1If you need it rotated 180, just use the regular rotate buttons :D
+1@jamesPLANESii I've tried it... put 6 of the towers 2001 memorial together and pressed f10, lots of explosions and my pc got hot, but it didn't lag too hard😂
@small1324 thanks!!
@AWESOMENESS360 $35 for a pc that can handle 20k parts...
+1@SaturnV I literally dropped my phone into my cereal bowl this morning when I saw that notification :)
@SaturnV gets featured
Spitting out Coffee intensifies harder
@QingyuZhou not that this is bad but... the engine could've been scaled...
@WeSeekANARCHY xD I couldn't get the front to look how I wanted, so I kept it the same
+1@TheDepressedPig yeah I had to add weight and aero to the front to compensate for that... and the front wheels only go up to 0.1 max power, so it's really not horrible, since the back wheels have 0.5 max.
@WeSeekANARCHY yeah... more so on the regera though
Aren't those just wasps tied together and repainted?
@Delphinos @CRJ900Pilot thanks!
@Delphinos thanks!
My dignity
+6@TakicraftCorporation @Spikerya
+1@FastDan it does Gold Prix in 35 seconds xD
+1...could be 34-33 if I knew how to drive