@ActullyObama I've not been able to replicate the issue. What i can tell you though is since the last update some issues came to light regarding wheels, shocks, and rotators. My best advice is to go get a wheel from the little bugger, save it as a subassambly, and use that.
Ok but you're trying to compare how pattern recognition brain works vs non patter recognition brain... most people typically don't have pattern recognition brain.
hinge rotators connections broken since at least this update:
I can't have hinge rotators connected on more than one end without it immediately disconnecting on spawn, but it shows connected in editor. Sometimes connections still work if both ends are connected to a small rotator, but adding a shock into the mix breaks this fix. making suspensions impossible to build
@Dracul0Anderson increase the weight of the rotator or decrease the weight of the item(s) it is moving using the designer suit xml editor. For instance if it is a cargo door or wing, use the editor to reweight each piece including the rotator so the weight is distributed evenly, or the rotator has more weight than the wing.
Weird! I can tell you the cg is too far back, and you may want to add aero
Edit: I reset all traction values to 100% and it performs way better. I saw from your settings what you were trying to do but the physics is flipped because it's an awd car.
I don't know how your car works at all. You have your wheel connected to a fuselage with is connected(at a single point) to one shock. This creates a very loose connection because the shock tends to move all around (not just up and down) i encountered this on one of my builds. You need to build at least a single wishbone suspension to link things together properly. I recommend taking a look at the stock little bugger for inspiration (or hell copy the suspension intirely).
@Zero0Two2 using pieces someone else built (ie a gun,) without giving credit, while fround upon isn't against the rules. @SupremeDorian (please correct me if I'm wrong) sites that this build was pleagerized, however, you can see in the predecessor chain it isn't (again, please correct me if I'm wrong, like if he ripped off some pieces and then posted it to make it look like he built it then I understand)
The atmospheric drag model in Simpleplanes is broken. This is why with replicas I just tune the plane to achieve the correct speed at cruising altitude
By the way I just remembered. Anytime I did encounter part mirroring off center, and checked the center alignment and found it was correct, the constant factor was that I was using a modded main cockpit part. Either Gestours glass cockpit, or there was another one i forget who made it. It looked like a tiny ball and I'd use it as a pilots head.
Anyway I don't think any of the stock cockpit parts trigger it. I can double check the flight computer though
VR is more of flight mode for the base game. It doesn't even have an editor. I wouldn't be surprised if All they did was update spvr to run all the new parts.
B because I think you're greatly over estimating the overlap. Yes you will be able to load an SP1 aircraft into SP2 but I think the UI for each part will be more similar to Juno. For example the wings, I think we're actually getting the wings from Juno and those have all kinds of more attributes than in Simpleplanes, physical shape and leading/trailing edge taper being a few of them. And that's just the back compat parts. We're getting a tone of new parts as well.
Do you even know how hard it is finding and then programming custom sounds for a game? I used to do it for realflight using FSX sound fx.
Please. Don't ever request this again.
That being said if they did do it and it was as easy as it was for realflight I'd totally do every engine I could find.
+1T
Someone's been sequestered
@hpgbproductions depends on what you're going for. they look good on my jeep. not so much on my grandpa's truck.
+1Dammit now they're ruined for me
I wish steam would launch mobile support for android and iPhone
On Android. Not seeing any issues but I'm also listed as a beta tester on the store page. @SupremeDorian
@V will there be more than two sliders?
+3That looks like a 2016 Kia forte 5.
My dad has one in that color
@32 @Agent1Scope This.
I think you're overthinking things
https://www.simpleplanes.com/a/4NS7q4/1941-Jeep-Rock-Crawler
@ActullyObama I was gonna tell you to do that actually lol.
Edit: Here's a little secret
I used the rear suspension all around and made it so the front wheels steer the car.
@ActullyObama I've not been able to replicate the issue. What i can tell you though is since the last update some issues came to light regarding wheels, shocks, and rotators. My best advice is to go get a wheel from the little bugger, save it as a subassambly, and use that.
Not sure what game you're playing but a kill is a kill
It's been lagging on my pc as well. Not sure what the issue is.
Ok but you're trying to compare how pattern recognition brain works vs non patter recognition brain... most people typically don't have pattern recognition brain.
... Now go submit your spoon to the tiktok team, and sit in the corner and think about what you did.
+1@WalrusAircraft you're still alive!?
Google Translate has exited the chat
@SupremeDorian Andrew's already on it. But I tagged you if you're curious
hinge rotators connections broken since at least this update:
I can't have hinge rotators connected on more than one end without it immediately disconnecting on spawn, but it shows connected in editor. Sometimes connections still work if both ends are connected to a small rotator, but adding a shock into the mix breaks this fix. making suspensions impossible to build
@RailfanEthan Ok so this guy's a troll. got it.
When was open beta launched?
@Dracul0Anderson increase the weight of the rotator or decrease the weight of the item(s) it is moving using the designer suit xml editor. For instance if it is a cargo door or wing, use the editor to reweight each piece including the rotator so the weight is distributed evenly, or the rotator has more weight than the wing.
+2@ActullyObama what's REALLY weird about your car is the brakes only work half the time.
Weird! I can tell you the cg is too far back, and you may want to add aero
Edit: I reset all traction values to 100% and it performs way better. I saw from your settings what you were trying to do but the physics is flipped because it's an awd car.
@ActullyObama let me drive it on my pc and see what it's doing.
If you happen to have an RC car lying around (even a cheap one) study the suspension and try to build it.
@SupremeDorian thanks for the clarification.
How does one even get to platinum with that kind of behavior?
Must be one of life's mysteries.
@littlenika
+1I don't know how your car works at all. You have your wheel connected to a fuselage with is connected(at a single point) to one shock. This creates a very loose connection because the shock tends to move all around (not just up and down) i encountered this on one of my builds. You need to build at least a single wishbone suspension to link things together properly. I recommend taking a look at the stock little bugger for inspiration (or hell copy the suspension intirely).
You could try increasing the sideways traction asymptote in xml
Might as well pick a branch and do your four years! Cheers!
@Graingy came here to say something just as bad.
@Zero0Two2 using pieces someone else built (ie a gun,) without giving credit, while fround upon isn't against the rules. @SupremeDorian (please correct me if I'm wrong) sites that this build was pleagerized, however, you can see in the predecessor chain it isn't (again, please correct me if I'm wrong, like if he ripped off some pieces and then posted it to make it look like he built it then I understand)
+1@Graingy based on my own observances
@Graingy it's over exaggerating ground effect but the ground effect only effect drag, not wing lift.
@Graingy because it does in real life?
The atmospheric drag model in Simpleplanes is broken. This is why with replicas I just tune the plane to achieve the correct speed at cruising altitude
By the way I just remembered. Anytime I did encounter part mirroring off center, and checked the center alignment and found it was correct, the constant factor was that I was using a modded main cockpit part. Either Gestours glass cockpit, or there was another one i forget who made it. It looked like a tiny ball and I'd use it as a pilots head.
Anyway I don't think any of the stock cockpit parts trigger it. I can double check the flight computer though
Mirroring, and by conjuncture part connections, need to work Exactly as they work in SP1 (NOT JUNO BECAUSE IT'S BROKE AF.)
Personally I very rarely encounter glitches with mirroring but I have a few times.
Are you in the western Washington are? That looks like Mt St Helens.
+1@LowQualityRepublic it's from Archer
I can barely read some of those images, and the rest not at all. Next time, just type the description of the post in the description box.
+1@weebabyseamus No Problem! It's what I like doing.
@SupremeDorian you should ad weapons ballance by Rainmac
VR is more of flight mode for the base game. It doesn't even have an editor. I wouldn't be surprised if All they did was update spvr to run all the new parts.
@V oh gotcha
B because I think you're greatly over estimating the overlap. Yes you will be able to load an SP1 aircraft into SP2 but I think the UI for each part will be more similar to Juno. For example the wings, I think we're actually getting the wings from Juno and those have all kinds of more attributes than in Simpleplanes, physical shape and leading/trailing edge taper being a few of them. And that's just the back compat parts. We're getting a tone of new parts as well.
+3@Snargles @AndrewGarrison I can confirm this