Hey bossman, I updated my homepage with your new name and your new Avatar picture. And I hot linked your name back to your homepage. Also if you have a particular gif under one Meg you would like me to use, send me a link. Welcome back buddy. Z 😺
Sorry, FalHartIndustries, I just looked at the date of this build \ question , lol you're probably a pro at everything I already said. Lol... Ooops...z 🤣
SPAircraftOfficial is absolutely correct. What you're doing there is you're using manual connections and you need to get good at it. Especially for troubleshooting. For instance let's say you have a rear control surface like on a fighter jet that's controlled with a rotor. A lot of time that control surface (rear wing) wants to automatically make its own connection to the fuselage instead of the rotor that's controlling it. So you put your rotor where you want it, disconnect all the connections between the rotor the fuselage that wing, then connect them manually. That way the rotor actually works. Because if that Wing is accidentally connected to the rotor and any part of the fuselage, then it will not move at all. I'm constantly using manual connections on all of my builds to verify my own connections, automatic connections, you name it. One last thing, (sorry my comments can be very long) let's say you launch your aircraft to Wright airport. Your aircraft appears on the runway, then you hear a splash out in the distance., what that is, is somewhere either on your build or near your build a piece has no connection whatsoever. Again you would click on the suspected part, and use manual connections to verify whether or not it's connected. Whoop whoop. You will become VERY proficient at using manual connections . mark my words. Lol. Z😸
@DatMaluchGuy19 @LUPIN @Thunderthud Hey guys, thank you so much for the upvotes on the video and this build. I hope you have time to take her up and put her through her paces. If you do I, would love to hear your feedback. Thanks again guys, seriously, it means a lot to me. Z 😺
Guys, you I have to see this. Start in the air and give it just a little gas (don't be afraid to give it a lot) and slowly increase your throttle. Then check out how sweet this thing Banks, it's crazy ! And tell your friends. please.... Z 🙀 @winswings @ToeTips @MrCOPTY
Love the build. Spotlight, upvote. I was able to start it up just by looking at the switches in Reading the panel it all made perfect sense. The only thing was the two red buttons that engage the engine or not labeled I finally hit them by mistake. The only thing I would change is label those two red buttons as engine start left and right. Other than that one thing love this aircraft. Fantastic job Z 😺
@MrSilverWolf fyi, everyone one of these people I have been tagging on ALL of my posts for the last several months. They all have been tagged on at least 10 of my last builds. NOT ONE has requested not to be tagged. As a matter of fact , they all upvoted this vid AND have requested to be tagged on my next build. Should I not tag the individuals who requested to be tagged ? I think you saw all the tags and jumped the gun. Please look at my last 10 posts and you we'll see all the same individuals tagged and all the same individuals keep upvoting. Thanks ! Have a nice day Z 😺
@MrCOPTY Wow, I just came across your location tech. I'm simply floored. It is so next level. I also stole (borrowed with fourth coming permission... lol. ) it and put it in my aircraft. I've been installing it for hours and I'm stuck. I sent you my aircraft in a private post to have you take a look at it. I know it has to be something simple that I'm missing. Z 🥺
@MAPA Nice, I saved it for AI spawn Z 😺
+2Wow, did you guys see how many gyros it took to do this ? Hilarious ! I love it .... Z 🥴
+2Welcome
+2FYI switch the control surfaces on the main wings from yaw to ROLL
and it will be perfect Z 😺Lol, I successfully landed this. Lol Z 😸
+2@Superliner350 page 2, second line from the bottom, last name on the right bud ! Z 🙀
+2@Icecraftgaming @Bryan5 @MrCopty Thanks guys for your
+2CONSTANT
support !@SomeSPGuyWhoLikesLore I tried using a rotator but I couldn't get it to budge. So if it's possible I certainly don't know how to do it. Z 😺
+2@MrAir420 oh God no. You will find I'm one of the nicest (friendliest) players in Simple planes. If I can ever help you please feel free to ask. Z 😺
+2Hey bossman, I updated my homepage with your new name and your new Avatar picture. And I hot linked your name back to your homepage. Also if you have a particular gif under one Meg you would like me to use, send me a link. Welcome back buddy. Z 😺
+2Hey guys, I been working on this in the background over the last week or so. Thoughts ?
+2@Emma159
@MrCOPTY
@50CalChicken
Win, I hope you don't mind but I borrowed your "Auto Flaps" ™ with your patented ”Stability Control Servos" ™ @winswings
+2@SimpleCreate I thought you might like this. Please read description. Lol Z 😺
+2I'm still constantly looking for the spotlight button on your builds. When will I learn..... Lol Z 😺
+2@SPAircraftOfficial That brings me way back to when I was first learning.... (In a singing voice) Meeeeeemories........lol Z 🫠
+2@Emma159 Heck yeah, don't forget to look inside of it... Lol. Z 😺
+2Sorry, FalHartIndustries, I just looked at the date of this build \ question , lol you're probably a pro at everything I already said. Lol... Ooops...z 🤣
+2SPAircraftOfficial is absolutely correct. What you're doing there is you're using manual connections and you need to get good at it. Especially for troubleshooting. For instance let's say you have a rear control surface like on a fighter jet that's controlled with a rotor. A lot of time that control surface (rear wing) wants to automatically make its own connection to the fuselage instead of the rotor that's controlling it. So you put your rotor where you want it, disconnect all the connections between the rotor the fuselage that wing, then connect them manually. That way the rotor actually works. Because if that Wing is accidentally connected to the rotor and any part of the fuselage, then it will not move at all. I'm constantly using manual connections on all of my builds to verify my own connections, automatic connections, you name it. One last thing, (sorry my comments can be very long) let's say you launch your aircraft to Wright airport. Your aircraft appears on the runway, then you hear a splash out in the distance., what that is, is somewhere either on your build or near your build a piece has no connection whatsoever. Again you would click on the suspected part, and use manual connections to verify whether or not it's connected. Whoop whoop. You will become VERY proficient at using manual connections . mark my words. Lol. Z😸
+2@DatMaluchGuy19 @LUPIN @Thunderthud Hey guys, thank you so much for the upvotes on the video and this build. I hope you have time to take her up and put her through her paces. If you do I, would love to hear your feedback. Thanks again guys, seriously, it means a lot to me. Z 😺
+2Guys, you I have to see this. Start in the air and give it just a little gas (don't be afraid to give it a lot) and slowly increase your throttle. Then check out how sweet this thing Banks, it's crazy ! And tell your friends. please.... Z 🙀 @winswings @ToeTips @MrCOPTY
+2@ThomasRoderick ok Cool, thanks ! Z 😺
+2Ice Click here, you've been modified & bumped
+2This is FANTASTIC !
+2Activate 4 made me laugh...... Z 🙀
+2This is so good....Z 🙀
+2@ZerkkTheSimper That's ok, just have fun !
+2Love the build. Spotlight, upvote. I was able to start it up just by looking at the switches in Reading the panel it all made perfect sense. The only thing was the two red buttons that engage the engine or not labeled I finally hit them by mistake. The only thing I would change is label those two red buttons as engine start left and right. Other than that one thing love this aircraft. Fantastic job Z 😺
+2I got more spotlights !
+2@Emma159
+2@Transair56
@AuroraPlanes
This was great. You should do more of these...too funny... Z🤣
+2@VenusLancer Lol that's funny, (well not in a mean way) I'm happy to keep tagging you on my builds ! Z 😸
+2@MrSilverWolf fyi, everyone one of these people I have been tagging on ALL of my posts for the last several months. They all have been tagged on at least 10 of my last builds. NOT ONE has requested not to be tagged. As a matter of fact , they all upvoted this vid AND have requested to be tagged on my next build. Should I not tag the individuals who requested to be tagged ? I think you saw all the tags and jumped the gun. Please look at my last 10 posts and you we'll see all the same individuals tagged and all the same individuals keep upvoting. Thanks ! Have a nice day Z 😺
+2@DatMaluchGuy19 Notice I stopped making a mistake on your name. Lol
+2@ThatRandomCouchPotato Thanks Bud... poor guy was at zero points a minute ago and he what's nice enough to upvote one of my builds... Z 🥺
+2@MrCOPTY Wow, I just came across your location tech. I'm simply floored. It is so next level. I also stole (borrowed with fourth coming permission... lol. ) it and put it in my aircraft. I've been installing it for hours and I'm stuck. I sent you my aircraft in a private post to have you take a look at it. I know it has to be something simple that I'm missing. Z 🥺
+2I bombed the aircraft carrier and the 2 destroyers couldn't hit me with AAA. Then I dodged their missiles for a bit..... fun...fun....fun... Z 🙀
+2@Mason08 @Emma159 @ZerkkZxeSP
+2@MrCOPTY I shot the turret w a missile every time but I did not show it. I will post a special missile for you to use... Z 😺
+2@Mason08 @Emma159 @ZerkkZxeSP
+2@o2o @Stanmich @VenusLancer
+2@ThatRandomCouchPotato @WisconsinStatePolice @LunarEclipseSP
+2@TheCaper
+2@mrcarrot @SaabJ29 @Louverture7
+2@DDVC @MrCOPTY @UnfairchildFH227
+2@JuanShot2Go @Smeagleandpiss2 @DatMaluchGuy19
+2@SPAircraftOfficial @FoxG @WinsWings
+2@weeeeeeeeeeeeeeee @AuroraPlanes @VoidGuardian
+2@VittorVolotok @UniroAzerr @50CalChicken
+2@AverageUMP45Simp @SkyJayTheFirst @GravityAviation
+2I know it's based on another aircraft but I think it's cool. Z 🤧
+2@Mason08 @Emma159 @ZerkkZxeSP
+2