@Solarisaircraft It's super easy. Just put your link text in square brackets [] and right next to it the link in normal brackets ()
To get a link to SimplePlanes.com with the link text "example" just do the following:
In square brackets [example]
Right next to it in normal brackets (https://www.simpleplanes.com)
@AndrewGarrison There are also some invisible places on the maps that makes you explode of you drive into them. I have found is especially dangerous to drive around the buildings at Yeager (Murphy) airport.
For thrust reversing, just bind a VTOL engine to braking. (And obviously put the nozzles facing forwards) I actually experimented a lot with thrust reversing in my early days. Feel free to look at my earlier builds for inspiration.
@AndrewGarrison After more research it seems to be the rotation that's of when mirroring. Also the new parts are a little buggy and sometimes the input gets stuck on the car engine and piston. (I can't change it)
@redbear89 Well, first I had to make the letters. The A was really easy but the S is heavily location-/rotation-/size-modded. Then I put an S on both sides and made sure it only attached to the rudder. Then I put the rest of the letters on the vertical stabiliser. All this required a lot of nudging parts into place.
We really need a way to make round fuselage blocks with a diameter of up to 5 blocks. If we get a new airliner jet engine we need to be able to make ROUND fuselages, not square ones!
@FrankieB Yes, and we have been needing flaps since the beginning!
Nice, nice, nice
Much better!
@Frant24 Upload to imgur and copy the direct link and use it
Looks nice in the Lufthansa livery
@SimpleTechAndResearch Exactly! Now you can show users how to do stuff with markdown e.g.
_this is how you /could/ write in italics_@SimpleTechAndResearch You can write it as it should be
[example](https://www.simpleplanes.com)if you write it between ` those@Solarisaircraft It's super easy. Just put your link text in square brackets [] and right next to it the link in normal brackets ()
To get a link to SimplePlanes.com with the link text "example" just do the following:
In square brackets [example]
Right next to it in normal brackets (https://www.simpleplanes.com)
Result: example
How it looks
[example](https://www.simpleplanes.com)(The red text is to stop it from appearing as an actual link)
Parts
How to make a link:
[Link text](URL)Example
(
[Example](https://www.simpleplanes.com))Careful with the small rotators though: they don't clip with other blocks too well.
@General360 Well the plane was mine, he made the Lufthansa colour scheme ;)
Look for parts with the parts tag
Would be cool to be able to make bogies this way too
@Ravenblack Cool!
Ok
@AndrewGarrison There are also some invisible places on the maps that makes you explode of you drive into them. I have found is especially dangerous to drive around the buildings at Yeager (Murphy) airport.
@AndrewGarrison Great!
Look further down and you might find something :P
I like it, but it's very bouncy
You've gotten many points from this challenge ;)
@jamesPLANESii me too!
@BaconEggs What was the predecessor?
@AndrewGarrison Yes. I can't change it. It started working after I changed the input in the XML though.
@Ducani I don't have very much time now either, but this summer sounds great!
@GregMonk Thank you!
For thrust reversing, just bind a VTOL engine to braking. (And obviously put the nozzles facing forwards) I actually experimented a lot with thrust reversing in my early days. Feel free to look at my earlier builds for inspiration.
@CakeMixRemix Maybe I will do one now that we have wheels. It will probably be released alone though :P
My one was a 3x3 :P
Maybe I would've used smaller rotation increments on this because it's bigger though
@Flightsonic Same as I used on my parts then :D
What are the rotation increments?
I would've expected the tail logo to move with the rudder ;)
Also use the colour scheme/repainted or whatever it is called. (tag)
EDIT: The tag is called "painted". Please use that tag.
@AndrewGarrison After more research it seems to be the rotation that's of when mirroring. Also the new parts are a little buggy and sometimes the input gets stuck on the car engine and piston. (I can't change it)
@BaconAircrafts
@Rohan Easy, just put another wing in the main wings
@FacePlanes I also have that!
0 downloads and 5 upvotes...
@Baldovino Are you kidding me?!
Nice! I would put the rear gear closer to the CoM if I were you. :P
I know! It's awesome!
Works well on my mobile though
Lags my pc like crazy ...
Great ideas! Especially the round fuselage thing!
@Skua Did you have access to the beta one month ago?!
Congrats on 10k!
@redbear89 Well, first I had to make the letters. The A was really easy but the S is heavily location-/rotation-/size-modded. Then I put an S on both sides and made sure it only attached to the rudder. Then I put the rest of the letters on the vertical stabiliser. All this required a lot of nudging parts into place.
We really need a way to make round fuselage blocks with a diameter of up to 5 blocks. If we get a new airliner jet engine we need to be able to make ROUND fuselages, not square ones!
@PhilipTarpley @AndrewGarrison Mirroring the new parts doesn't work, also this seems a little too flimsy.
@FrankieB Right click properties on the game in steam. Go to the Betas tab and opt in to the beta.