0:14 Delta CRJ7/9
0:22 AA E175LW
0:54 E175/190
1:06 Lufthansa 350
1:20 SAS 330
1:45 pretty rare to see an old livery NK 320
2:00 is a lot more common (NEO)
@Timplanes of course! I've studied aviation for over a decade now and am a qualified pilot, so I felt qualified to answer. Your best bet is to look up stormy approaches and landings shot from the inside, these can help you figure out which panels do what (since not all aircraft have spoilers that all behave the same).
Hello there @Timplanes,
You do want the speedbrakes to add and subtract from roll. in the example case of 20 degrees up from brakes and max input roll, they might be 10 and 30 degrees extended respectively.
The total amount of deflection (L+R) stays the same to keep lift loss and drag relatively constant.
Also note that the maximum extension should not exceed 60 degrees at any time, so having full spoilers up on ground+ full roll would not cause any panel to exceed 60 degrees, only the opposite side to drop.
I suggest using a single modded speedbrake halfway out each wing, tucked into the wing body.
@Timplanes This plane will be Delta, N996AT (and a blank one). If it were possible with the same level of detail, I would most certainly have made a version suitable for mobile users. Thanks for understanding.
@Kendog84 I'm glad you like, but it's actually super outdated now. I have much more efficient code, but it's not quite done. I'll tag you when I release it. (and it's all housed in variables, which didn't exist back then)
@Annedzsrue Thanks for the detailed response! I really like your builds btw, you and savage are the biggest powerhouses on this site for good quality airliners.
I really appreciate the attention to the livery detail, but the flight model is quite confusing for me. The rudder especially, moves so slowly that it's almost impossible to control the plane on takeoff and landing. The elevators and ailerons also take their sweet time, which leads to the plane being a "whale". Also I'm really missing that nice A330 gear tilt and suspension. Last thing from me would be the spoilerons, it takes less than a minute to code them. Actual last thing, you've got one extra flap canoe on those outboards. There's a couple more but I don't want to be a bore. Those were just some tips for you because I see you are trying to be realistic!
I like it a lot but the autopilot is extremely buggy
and the flutter speed should be much more in line with THIS (Page 13) I know this is for a different winglet, but 280KIAS is way too low of a speed.
@JacksEpicGamingYT I will not release a version with no mods. This plane is completely unusable without the FPS increases that modded parts provide. I presume it would be over 8,000 parts. You will have to remove a lot of detail, but I suppose nobody really needs a full interior and exterior plane anyway, right? :)
Note: I will release a version that is fully modded, with a standalone mod (that also includes the parts from my "Aircraft Seats" mod) to take this plane to the next level of optimization. I'm talking about making everything rigid one single part, similar to what @PlaneFlightX is doing with his SWL-120.
I might need to investigate this nose for my -120.
@AndrrewGarrison I will tag you as requested!
@JP11 Thanks, me too!
Nice Nice
I teleported myself 100 billion km away and there is only blackness
+5pretty nice!
+1Uh thanks?
it's a little small
+1no comments?
@Sense2 no work done recently, I'm working on my instrument rating rn :)
Hey that's my mod :)
+10:14 Delta CRJ7/9
+10:22 AA E175LW
0:54 E175/190
1:06 Lufthansa 350
1:20 SAS 330
1:45 pretty rare to see an old livery NK 320
2:00 is a lot more common (NEO)
Nice low part count!
Very nice!
+1@Senseuh why not
@Djdkcjnddc oh man, this was in 2020, it's not really good at all- there was no fuselage cutting back then.
Pretty realistic, not bad! Did you use a real engine to model this?
This is a very good job, but what about the back seats?
+1@JacksEpicGamingYT what are you using it on? steam, something else?
@Timplanes of course! I've studied aviation for over a decade now and am a qualified pilot, so I felt qualified to answer. Your best bet is to look up stormy approaches and landings shot from the inside, these can help you figure out which panels do what (since not all aircraft have spoilers that all behave the same).
+2@JacksEpicGamingYT update your sp
Hello there @Timplanes,
+2You do want the speedbrakes to add and subtract from roll. in the example case of 20 degrees up from brakes and max input roll, they might be 10 and 30 degrees extended respectively.
The total amount of deflection (L+R) stays the same to keep lift loss and drag relatively constant.
Also note that the maximum extension should not exceed 60 degrees at any time, so having full spoilers up on ground+ full roll would not cause any panel to exceed 60 degrees, only the opposite side to drop.
I suggest using a single modded speedbrake halfway out each wing, tucked into the wing body.
@SimpleStudent I commented that a year ago and you can use the MGs if you know how to set it up.
+1@Kendog84 I'm glad you like it!
+1@Sense2 There will not be a version without mods.
+1smoothing is a thing lol
+5suspicious plane
@Timplanes This plane will be Delta, N996AT (and a blank one). If it were possible with the same level of detail, I would most certainly have made a version suitable for mobile users. Thanks for understanding.
@TimsonAviation There is no steam version, I have have the game on steam and this works fine for me.
It looks wonderful, I've yet to test it but from the preview I'm sure it's great!
@FazbearAirwaysX ??
@boom1738 Sorry I can't give an exact date, there is still a lot of work to do.
@boom1738 Before December 31, 2023.
@Bird6369 I got it to +124G and -46G
+3@Sense2 There won't be a version with no mods, sorry.
@Kendog84 I'm glad you like, but it's actually super outdated now. I have much more efficient code, but it's not quite done. I'll tag you when I release it. (and it's all housed in variables, which didn't exist back then)
+1@Legomaster0418 it'll be under 5500, I promise.
@Sense2 that's very impressive! This plane is outdated now though, I'm working on a replacement as you might see (the 717).
@Annedzsrue Thanks for the detailed response! I really like your builds btw, you and savage are the biggest powerhouses on this site for good quality airliners.
I really appreciate the attention to the livery detail, but the flight model is quite confusing for me. The rudder especially, moves so slowly that it's almost impossible to control the plane on takeoff and landing. The elevators and ailerons also take their sweet time, which leads to the plane being a "whale". Also I'm really missing that nice A330 gear tilt and suspension. Last thing from me would be the spoilerons, it takes less than a minute to code them. Actual last thing, you've got one extra flap canoe on those outboards. There's a couple more but I don't want to be a bore. Those were just some tips for you because I see you are trying to be realistic!
+1I like it a lot but the autopilot is extremely buggy
and the flutter speed should be much more in line with THIS (Page 13) I know this is for a different winglet, but 280KIAS is way too low of a speed.
@Chich2000 release date has been updated a tiny amount lol
2023. No more information available, sorry!
This is pretty good, my only gripes are that it climbs at 25,000 fpm and stops in 200 feet.
@YourLocalPerson it was too much so I cancelled it lol
+1This is one of the best 707s, there aren't many on here unfortunately.
@GrandPrix you can delete the cockpit, then it's actually 0 parts.
+1Apex Predators?
+1@ReignSUPREME This is very clean and beautiful. You made an amazing replica, the faces are done so well.
+1@Coop09814 Jacksepicgaming will be doing that as he said below.
+1@JacksEpicGamingYT I will not release a version with no mods. This plane is completely unusable without the FPS increases that modded parts provide. I presume it would be over 8,000 parts. You will have to remove a lot of detail, but I suppose nobody really needs a full interior and exterior plane anyway, right? :)
Note: I will release a version that is fully modded, with a standalone mod (that also includes the parts from my "Aircraft Seats" mod) to take this plane to the next level of optimization. I'm talking about making everything rigid one single part, similar to what @PlaneFlightX is doing with his SWL-120.
@AlbertanPlaneMaker You will be tagged as well, thank you for your interest