You can try making a copy that has the control surfaces edited so that no inputs can affect them except trim, and place it in the same build area as the OG build, in the location you want it to be in formation (probably on front of and to the side of the OG build). Then copy it again and place it also in formation. From there, spawn in the air, go full throttle and trim out so the formation levels off, and when you go to break away using pitch and roll, only one plane should move. Then, you can get the screenshot.
@Graingy while that is the case if you just use the arrows, if you tap on the number you can enter any number using the on screen keyboard. Also the largest size is 10 no way to change that without XML
I use an iOS IPad, and the joysticks are easy to control. Though you can see what device some uses by going to any plane they made and going to specifications.
Cool! Very fast! However, next time make sure to add a description with all activation groups and what they do listed, as we do not know anything about your plane. Also, get a screenshot with the entire plane.
@GuardianAerospace yes that is a feature, but only if you spawn there to begin with, it doesn’t work if you teleport there. This gadget is for any other spawn in Snowstone.
If I don’t know what to build, I like to build something that I haven’t built before, or look for an active challenge. If you want something specific, try a biplane.
As someone who has made many VR cockpits, it isn’t that hard. You don’t have to disable collisions (unless it’s a moving part like a joystick). If the place where your cockpit is is complicated, build it outside where it will be, and use fine tuner to put it in. Curated means you have complete control over the aircraft using only the controls in the cockpit, and allows people to use it in VR.
I know almost nothing about Funky Trees so don’t take my word for it but I think it’s possible that FireWeapons is an input (equals 1 when you are pressing the button), or it could be that you want FireGuns.
However, it is likely that I could be completely wrong since I’ve never used funky trees.
Nice plane! One suggestion would be to have your first screen shot to be of the entire plane, as that would let people know what the build was at first glance.
Nice glider with tow plane! One suggestion though is don’t use the mirror tool when you have a custom cockpit, as it will affect the cockpit, potentially ruining it. Use the mirror part tool instead. (Found in the rotations part of the designer, has a tail with a wing)
I believe it is because many people are uploading their creations at once, but the site can’t handle so many uploads at one time, so none of them are being published.
@AEROSPACE1128 Oh, well you’ve gained some notoriety, and you got on highest rated. You also got enough points to make it to silver, which normally takes some effort. It probably got removed because you were getting so many points with no effort, idk why you kept your points though.
@idkwhatosay It’s okay since you are new and probably don’t know this, but don’t advertise your stuff in the comments unless it was requested (i.e. if someone asks for VTOL builds, then it would be okay for you to give them the link to a VTOL build you made)
@Mousewithamachinegun123 The way I do mine is to use the move tool (in the blueprint menu) to put the screenshot above the build, I then unselect the tool and carefully drag up (to not change perspective at all) until It is lined up
Nice job with the tank! Two suggestions are to change the name to just steel dawn and make the first screenshot one of the entire build, as it would give people more of an idea on what the build actually was (I originally thought it was a destroyer), and also list the controls and all of the activation groups in the description.
Walv!s makes a good tutorial on this
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwiFkY338qDAxUbHjQIHSeSDcEQwqsBegQICxAG&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DXadzaCZXzB0&usg=AOvVaw13qfgZrSIWPQeoLWFggls&opi=89978449
P.S. if you want the plane that is breaking away to be releasing flares, remove the counter measure dispensers from the copies.
You can try making a copy that has the control surfaces edited so that no inputs can affect them except trim, and place it in the same build area as the OG build, in the location you want it to be in formation (probably on front of and to the side of the OG build). Then copy it again and place it also in formation. From there, spawn in the air, go full throttle and trim out so the formation levels off, and when you go to break away using pitch and roll, only one plane should move. Then, you can get the screenshot.
@Graingy while that is the case if you just use the arrows, if you tap on the number you can enter any number using the on screen keyboard. Also the largest size is 10 no way to change that without XML
+1I use an iOS IPad, and the joysticks are easy to control. Though you can see what device some uses by going to any plane they made and going to specifications.
Maybe because it can redirect to an app (SimplePlanes) but I’m not sure.
Cool! Very fast! However, next time make sure to add a description with all activation groups and what they do listed, as we do not know anything about your plane. Also, get a screenshot with the entire plane.
This is my first time using funky trees.
@Mousewithamachinegun122 How do you make this hover?
@GuardianAerospace yes that is a feature, but only if you spawn there to begin with, it doesn’t work if you teleport there. This gadget is for any other spawn in Snowstone.
+1@Mousewithamachinegun122
+2If I don’t know what to build, I like to build something that I haven’t built before, or look for an active challenge. If you want something specific, try a biplane.
Interesting concept for a twin boom aircraft
+1Grave robbing
@WisconsinStatePolice oh ok
+1@WisconsinStatePolice Arkansas exists, but not on Earth
+1Water moment
+2@Mousewithamachinegun123 Yes, and if they think it satisfies the requirements, they will curate it
Cockpit looks good!
+1@Mousewithamachinegun123 just do the VR tag, and that’s it.
+1Happy leap year awareness day!
+1Annoy the deceased
Build something you haven’t built before, like a boat, car, biplane, stealth bomber, etc.
+1@Mousewithamachinegun123 oh yeah, make sure to give it the VR tag or it can’t get curated
@Mousewithamachinegun123 I also like to give them button to cycle targeting mode, next weapon, and next target if the plane has weapons.
+1Make sure to give basic flight controls, gear, and all activation groups, plus anything else
+1As someone who has made many VR cockpits, it isn’t that hard. You don’t have to disable collisions (unless it’s a moving part like a joystick). If the place where your cockpit is is complicated, build it outside where it will be, and use fine tuner to put it in. Curated means you have complete control over the aircraft using only the controls in the cockpit, and allows people to use it in VR.
+1@Mousewithamachinegun123 Thanks! I’ll try it out
+1@Mousewithamachinegun123 Is there a prize for most upvoted?
+1@Tortoise500000 one tip would be to add tags, especially the VR tag so it can get curated (allows people to use it when playing with a VR headset)
Both this and the Marader are really good!
I know almost nothing about Funky Trees so don’t take my word for it but I think it’s possible that FireWeapons is an input (equals 1 when you are pressing the button), or it could be that you want FireGuns.
However, it is likely that I could be completely wrong since I’ve never used funky trees.
@WinsWings Thanks! I just added a history, in case you arrived too early to read it.
Nice plane! One suggestion would be to have your first screen shot to be of the entire plane, as that would let people know what the build was at first glance.
Nice glider with tow plane! One suggestion though is don’t use the mirror tool when you have a custom cockpit, as it will affect the cockpit, potentially ruining it. Use the mirror part tool instead. (Found in the rotations part of the designer, has a tail with a wing)
@WinsWings Can I do some kind of futuristic seaplane?
+1Beeg
+1I believe it is because many people are uploading their creations at once, but the site can’t handle so many uploads at one time, so none of them are being published.
Talk about perfect upload timing
@AEROSPACE1128 Oh, well you’ve gained some notoriety, and you got on highest rated. You also got enough points to make it to silver, which normally takes some effort. It probably got removed because you were getting so many points with no effort, idk why you kept your points though.
@ZerkkZxe ok thanks. What was his name again?
+1Seriously, please don’t upvote this, upvote D point, as that’s where the idea and all the work came from, I just changed the letter.
Just shows how lenient the game is on what should be able to fly
@idkwhatosay It’s okay since you are new and probably don’t know this, but don’t advertise your stuff in the comments unless it was requested (i.e. if someone asks for VTOL builds, then it would be okay for you to give them the link to a VTOL build you made)
@Graingy Like this?
+1@Mousewithamachinegun123 The way I do mine is to use the move tool (in the blueprint menu) to put the screenshot above the build, I then unselect the tool and carefully drag up (to not change perspective at all) until It is lined up
Nice job with the tank! Two suggestions are to change the name to just steel dawn and make the first screenshot one of the entire build, as it would give people more of an idea on what the build actually was (I originally thought it was a destroyer), and also list the controls and all of the activation groups in the description.
Thanks!
Walv!s makes a good tutorial on this
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwiFkY338qDAxUbHjQIHSeSDcEQwqsBegQICxAG&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DXadzaCZXzB0&usg=AOvVaw13qfgZrSIWPQeoLWFggls&opi=89978449
Sounds like TV static
@Stargazerreadytofly6371 Oh my bad. Sorry bout that