@Rjenteissussy here, I fixed the screens for you :) I also edited some of the railgun properties cus I felt like it was abit too much like a regular cannon. Feel free to edit this build further, or remove the bottom bay for the EML power pack? (according to @S1lly)
@Foxlikepancake on mobile it can be pretty tedious, but you don’t need a mod for it. What I do is use PSexpress app or wherever photo editing app, edit all the photos u want onto a single image. Then load it as a blueprint in build editor (eye button > blueprint). Then when you upload the image zoom into the images one by one. It might take a few tries but works for me so far
@MosquitowithaMachineGun yea dude I’ve seen the videos on both. They’re both still more of a tech demo and less game yet no? Seems like a blast though I haven’t tried them
@Mosquitowithagun my brother @Chariot is planning to build EDI but he just started with a new account lmao. I’m planning to do either the HALO pelican or Ace Combat’s CFA-44 nosferatu next
Hello @Seeras @crazyplaness, could you help me make this aircraft a successor to @Apollo018362 ’s Stealth Challenge? Help would be greatly appreciated, thanks!
Hi @MrSilverWolf, may I ask why you say the thumbnail is misleading? Other than it being a meme I would think you’d be able to tell what the post is about just be looking at the thumbnail. It also contains the actual build in all 3 pics. Did someone report it? Is it too political? Just confused about why it was removed, since people seemed to like it and there wasn’t any debate in the comments. I’m not sure if u can even see this. Thanks
PSA: I updated the XML for this craft to reduce the wobbling during Post stall manoeuvres. If there are any bugs feel free to let me know and I'll try to fix them
@KPLBall the problem is your centre of mass (COM) is way too far behind your centre of lift (COL), just move the COM forward by making the parts near the front heavier/ making the rear lighter. I also shifted your gear slightly forward since it tips over if the COM is in front of the front landing gear.
@spectre118 Thanks for the feedback man, the elevators flap due to the fly-by-wire system trying to compensate for the aerodynamic instability. If you activate group 5, the flapping stops but the aircraft is pretty hard to handle. But I’ll work on a better fbw system soon. I also decided to make the wings either fully swept or extended as unlike backward swing wings, this aircraft doesn’t handle well with its wings in a semi-extended position and looks pretty ugly. All in all thanks for the feedback and I glad u enjoyed the build!
@TheHaggisBasher haven’t played the fallout series but looks like it would be a fun build. Making the switch to jno now tho so might not be making anything here for abit
Yeah thats the best i can do without xml modding making the plane unrealistic. Feel free to modify in any way or just simply lower the rear stabalizer movement off the rotators
For canards I've simply used two rotators attached to one another set to rotate in opposite directions at differing speeds and angles. Messing around with the angle and speed helps to find the desired effects. I'll upload the canard design of my Su-33 if you guys wanna check it out
@LunarEclipseSP yes indeed
+2@LunarEclipseSP Thank u!
+2@SuperSuperTheSylph the one and only macher of witwens
+1CFA-44 Nosferatu EML
@Rjenteissussy here, I fixed the screens for you :) I also edited some of the railgun properties cus I felt like it was abit too much like a regular cannon. Feel free to edit this build further, or remove the bottom bay for the EML power pack? (according to @S1lly)
+1@Rjenteissussy Nice!
+1@PrussianAirlines @worldwaraviations015 Thanks lads
+1@Rjenteissussy thanks m8
+1@Foxlikepancake on mobile it can be pretty tedious, but you don’t need a mod for it. What I do is use PSexpress app or wherever photo editing app, edit all the photos u want onto a single image. Then load it as a blueprint in build editor (eye button > blueprint). Then when you upload the image zoom into the images one by one. It might take a few tries but works for me so far
+1@StraitAircraft 😂😂😂 all in good fun man, thanks for the support!
+1@worldwaraviations015 thanks a lot man!! Appreciate it :)
+1@SomeSPGuyWhoLikesLore open to suggestions man :) I ran out of IQ
+1@MosquitowithaMachineGun yea dude I’ve seen the videos on both. They’re both still more of a tech demo and less game yet no? Seems like a blast though I haven’t tried them
+1@Rob119WithA105mmHowitzer agreed 100%, reach was truly Halo's last hurrah
+1@SkyJayTheFirst 😂😂😂 thanks for the spotlight!
+1@Rob119WithA105mmHowitzer ‘Hit em hard boss’
+1@SkyJayTheFirst Thanks mate :)
+1@tl working on the pelican now :)
+1@DeltaLinkAviation Thanks bud :)
+1@Mosquitowithagun my brother @Chariot is planning to build EDI but he just started with a new account lmao. I’m planning to do either the HALO pelican or Ace Combat’s CFA-44 nosferatu next
+1@Mosquitowithagun Thanks mate hope it wasn’t too horrible in flight :)
+1@Seeras Thanks!
+1Hello @Seeras @crazyplaness, could you help me make this aircraft a successor to @Apollo018362 ’s Stealth Challenge? Help would be greatly appreciated, thanks!
https://www.simpleplanes.com/a/T123Uq/Stealth-Challenge
+1Hi @MrSilverWolf, may I ask why you say the thumbnail is misleading? Other than it being a meme I would think you’d be able to tell what the post is about just be looking at the thumbnail. It also contains the actual build in all 3 pics. Did someone report it? Is it too political? Just confused about why it was removed, since people seemed to like it and there wasn’t any debate in the comments. I’m not sure if u can even see this. Thanks
@KPLBall
!It’s just a joke, please don’t send me to gulag
Dank u werry much @KPLBall
@EternalDarkness Finally got around to finishing this. Mostly decal work
@SimplePotato for now…
@SRWK thanks bud :)
PSA: I updated the XML for this craft to reduce the wobbling during Post stall manoeuvres. If there are any bugs feel free to let me know and I'll try to fix them
@Nerfaddict slow shutter is definitely my go-to effect ;)
@PUMPKINSIDD thank you good sir!
@DeeganishCountryball hahaha fair enough
Finally finished the nosferatu… it’s a little more than 200 parts lol
Check it out if you like sexy planes
@KPLBall the problem is your centre of mass (COM) is way too far behind your centre of lift (COL), just move the COM forward by making the parts near the front heavier/ making the rear lighter. I also shifted your gear slightly forward since it tips over if the COM is in front of the front landing gear.
Fixed it here
@EternalDarkness I meant to make this unlisted hahaha, will upload when it’s done properly. Thanks for the tips
@Bluesyn thank you!
Credit to @GuyFolk for the cool T-50 in the 2nd pic
(https://www.simpleplanes.com/a/f1iirA/SU-57-Felon-potato)
Credit to @GuyFolk for the cool T-50 in the 2nd pic
(https://www.simpleplanes.com/a/f1iirA/SU-57-Felon-potato)
@RestlessGalaxies took me awhile but heres the next build
@CatdogAerospace I subscribed to your Onlyfans
@CatdogAerospace Thanks man!
@RestlessGalaxies will do bro 👌🏻
@RestlessGalaxies same here man
@IDK0 thanks!
@cyon you should see it it’s pretty cool ;)
@cyon you’re probably too young to know about it but it’s a replica from the movie ‘Stealth’. Glad you enjoyed it tho :)
@spectre118 Thanks for the feedback man, the elevators flap due to the fly-by-wire system trying to compensate for the aerodynamic instability. If you activate group 5, the flapping stops but the aircraft is pretty hard to handle. But I’ll work on a better fbw system soon. I also decided to make the wings either fully swept or extended as unlike backward swing wings, this aircraft doesn’t handle well with its wings in a semi-extended position and looks pretty ugly. All in all thanks for the feedback and I glad u enjoyed the build!
@TheHaggisBasher haven’t played the fallout series but looks like it would be a fun build. Making the switch to jno now tho so might not be making anything here for abit
Yeah thats the best i can do without xml modding making the plane unrealistic. Feel free to modify in any way or just simply lower the rear stabalizer movement off the rotators
For canards I've simply used two rotators attached to one another set to rotate in opposite directions at differing speeds and angles. Messing around with the angle and speed helps to find the desired effects. I'll upload the canard design of my Su-33 if you guys wanna check it out