Pitch*0.5+Pitch*smooth(clamp01(VerticalG<7)*clamp01(VerticalG>-3.5),1)*0.5
Try this formula, it uses only the vertical component and turns off only half of the input at maximum overload, This significantly improves stability.
You can increase the multiplier of the first term (currently set to 0.5) and decrease the multiplier of the second term (0.5 too) to improve stability.
or
you can reduce the first multiplier and increase the second one for a more stringent limit.
Important
The sum of the multipliers must be equal to 1 (for the output to be complete)
I'm going to create a chassis for this car, and I can make an ESC system without using a gyroscope, a suspension with adjustable clearance and different driving modes. But I have serious problems with creating a design for this car
@LowtusF139 In fact, it is already possible to create skid assistance systems, the wheel already has the right set of "sensors" (side slide and front slide), you can find them in the variables of these parts. The ABS system can be quite problematic, since the "Brake" input cannot be controlled by programming. This problem can be solved by braking the engine (I may post these systems soon) . Sorry for the huge amount of text
Excellent, the best design on the site, but there is not much functionality, and I wanted it to be able to rotate freely, or use a gyroscope only during takeoff
@MobileGamer21 Oh, I remembered that I asked you to do this. And you said that it would not be mobile, I want to say again that your aircraft is very cool
@SilverStar Hi, thanks for the remark, all control on all axes except yaw occurs with the help of engine thrust adjusted for rotation speed. I posted this model for revision on a PC so that there are no problems with files. For braking and moving forward, use VTOL
Yes, I tried to reduce the speed of the flaps, it didn't help. When cleaning the chassis, it works, but when it is straightened, it does not, @CheetoPumkinEater1
wow, cool design, you copied the details very accurately. I'm starting to develop an updated drone (without wings for a quick stop). And no auxiliary engines, only VTOL engines. I already have a drone with altitude hold, no wings and no auxiliary power units. It remains to finalize only a couple of details.
Pitch*0.5+Pitch*smooth(clamp01(VerticalG<7)*clamp01(VerticalG>-3.5),1)*0.5Try this formula, it uses only the vertical component and turns off only half of the input at maximum overload, This significantly improves stability.
You can increase the multiplier of the first term (currently set to 0.5) and decrease the multiplier of the second term (0.5 too) to improve stability.
or
you can reduce the first multiplier and increase the second one for a more stringent limit.
Important
The sum of the multipliers must be equal to 1 (for the output to be complete)
Tested on an airplane "Wasp (Simple)".
+1It's just crazy. It starts from 0 to 100km/h in 3 seconds!
+1@dabestsock Okay, after a future update, the helicopter will be able to change systems.
+1@TTL Thank you for your time
+1I want to apologize in advance for my English, please ask questions if the instructions are not clear.
+1I'm going to create a chassis for this car, and I can make an ESC system without using a gyroscope, a suspension with adjustable clearance and different driving modes. But I have serious problems with creating a design for this car
+1Hi, I suggest putting input on the tachometer: smooth(clamp01(Rpm1/500)*clamp01(Pitch)+clamp01(-Pitch),0.5)
+1Excellent project
+1wow it turned out great
+1@LowtusF139 In fact, it is already possible to create skid assistance systems, the wheel already has the right set of "sensors" (side slide and front slide), you can find them in the variables of these parts. The ABS system can be quite problematic, since the "Brake" input cannot be controlled by programming. This problem can be solved by braking the engine (I may post these systems soon) . Sorry for the huge amount of text
you have reduced the mass of each part of the airframe to zero so it moves like )
looks like a futuristic airplane
Cool work!
@Verdugo at the heart of this ship is supposedly cold fusion, but since it was produced not on earth, we can guess how it is produced
Do you mind if I refine the functionality and control of this ship?
Excellent, the best design on the site, but there is not much functionality, and I wanted it to be able to rotate freely, or use a gyroscope only during takeoff
@MobileGamer21 Oh, I remembered that I asked you to do this. And you said that it would not be mobile, I want to say again that your aircraft is very cool
@MobileGamer21 I looked, really really waited for this aircraft on the site, but the main photo and your nickname cause a little suspicion👀
@SilverStar OK, no problem
@SilverStar Hi, thanks for the remark, all control on all axes except yaw occurs with the help of engine thrust adjusted for rotation speed. I posted this model for revision on a PC so that there are no problems with files. For braking and moving forward, use VTOL
colossal size thank you
@Pimpkin yes
@ThatMG393 use a RollAngle or PitchAngle depending on its location and divide by the degree measure of the rotor
@USCxOwner, Edge of tomorrow, that would be cool
@LockheedAndMartin Great, send your email and upon completion of the revision, I will send you an Xfile with the KA-52. Or should I post it myself?
You don't mind if I modify your model? I just know how to do yaw, pitch, roll on models of a twin-screw design
Top
@CheetoPumkinEater1 while I took the program from P 51 D
Yes, I tried to reduce the speed of the flaps, it didn't help. When cleaning the chassis, it works, but when it is straightened, it does not, @CheetoPumkinEater1
@CheetoPumkinEater1 Well, I mean that the wheels crash into the chassis flaps
@CheetoPumkinEater1 the bottom line is that I do not know the command to delay the movement of the landing gear flaps
@CheetoPumkinEater1 Okay, perhaps this is one of the few disadvantages of my aircraft
Try adding: "- YawRate/100" into the gyroscope so that the aircraft does not spin from Yaw
@Joshi13 Ok
@Joshi13 look at the input of the lower engines. I will explain in more detail what this entry means soon.
TOP
@BigBen108 wow
@Renameduser4 Yes, the design and controls are not mine. But I added altitude hold, aiming at the target and changed the power plant.)
TOOOOOOP your gyro fantastic. Thanks)
wow, cool design, you copied the details very accurately. I'm starting to develop an updated drone (without wings for a quick stop). And no auxiliary engines, only VTOL engines. I already have a drone with altitude hold, no wings and no auxiliary power units. It remains to finalize only a couple of details.