for anyone stumbling along this wanting to add it to their design, I could not figure out how to copy paste it so I just turned my creation into a subassembly, downloaded the camera and put the camera in the cockpit of the subassembly. Also question @MisterT, want me to credit you once i use it?
@Directbean724 I had the knowledge I guess. I looked up pool table, pool cue and pool ball dimentions and made them in the game on a 2:1 scale. i would've made it smaller if it wasn't for the balls being too tiny. I had to think of something to make the Cue ball seperate so i was able to make it work using the bounciness setting. Everything worked fine but I had to think outside the box to make the pool cue work because pistons weren't doing the job, so hence why the car. Thanks for your upvote btw :D
Since you are an IOS player I do suggest downloading creations with modded stuff on them and making a subassembly out of those. You can filter out the highest rated list by xml modded, that's how all IOS gamers have to get parts like that
i like the idea very much, however this plane uses the normall fuel powered engines. I tried to make planes with fast forever spinning rotators as engines but they don’t produce much speed and break at some point
@ToeTips i like small aircraft, and i like the challenge of cramping as much stuff into a small space as possible. Also this makes it unusual, which i'm also formiliar with
@SPAircraftOfficial XD yup, well it does add to the fact that pumpins aren't as smooth as plane fuselages even though I would've made it smooth if I didn't forget it. Thanks for the compliment and upvote regardless :D
If the parts are on a fuselage part make sure you turn off part collision in the moving parts whenever they go through another part, then connect them together using the connector tool and nudge them into place. If it so happens the hinge rotator still doesn't work try replacing it with a new one, due to a bug it'll stay stuck.
for anyone stumbling along this wanting to add it to their design, I could not figure out how to copy paste it so I just turned my creation into a subassembly, downloaded the camera and put the camera in the cockpit of the subassembly. Also question @MisterT, want me to credit you once i use it?
+3Thanks for the upvotes! @Suubk27 @DEADSHOT14 @WolfHunter9111 :D
+2@Directbean724 I had the knowledge I guess. I looked up pool table, pool cue and pool ball dimentions and made them in the game on a 2:1 scale. i would've made it smaller if it wasn't for the balls being too tiny. I had to think of something to make the Cue ball seperate so i was able to make it work using the bounciness setting. Everything worked fine but I had to think outside the box to make the pool cue work because pistons weren't doing the job, so hence why the car. Thanks for your upvote btw :D
+2Thanks for your upvotes!
+2@Kavazano @BeastHunter @goboygo1
Thanks for your upvote @Cabbage17 :D
+2Like I said to my friends, it looks like a droplet with wings lol. Thnx for the compliment and upvote @Mustang51
+2Everybody knows kong-fu fighting! HU! HA!
+2Since you are an IOS player I do suggest downloading creations with modded stuff on them and making a subassembly out of those. You can filter out the highest rated list by xml modded, that's how all IOS gamers have to get parts like that
+2That airbraking tho lol
+2You do realise that this railbus has 666 parts?
+2It’s just 👌🏻
+2Wait.... has NOONE noticed.....?
+2The COL is in FRONT of the COM with this plane, yet if flies...?
thnx for the upvotes @VerySaltySniper, @Cyberdays, @FastDan
+2i like the idea very much, however this plane uses the normall fuel powered engines. I tried to make planes with fast forever spinning rotators as engines but they don’t produce much speed and break at some point
+2@LunarEclipseSP Ty very much for the spotlight! :D
+1@LunarEclipseSP I barely check the site nowadays but I got a big project going on atm :o
+1@HanakoSan ty so much for the spotlight & upvote! :D
+1@LunarEclipseSP :o ty! I hope it still works after 2 years... Thnx for the upvote, really appreciated! :D
+1this is a life safer, i thought i just finished the cockpit of my latest build but nope XD
+1Thanks for the upvote! @AviownCorp :D
+1@ToeTips i like small aircraft, and i like the challenge of cramping as much stuff into a small space as possible. Also this makes it unusual, which i'm also formiliar with
+1Thanks you very much for the upvote and spotlight! @RepublicOfCursedPlanes and yes, how else are you suppost to sit in it XD
+1Thanks for the upvotes! @ToeTips & @Thunderthud :D
+1Just wow
+1Thanks for the upvote @MrCOPTY :D
+1Thanks for the upvote! @ImZerkkZxe :D
+1@Thunderthud oh wow nice seeing you again.
+1@SPAircraftOfficial XD yup, well it does add to the fact that pumpins aren't as smooth as plane fuselages even though I would've made it smooth if I didn't forget it. Thanks for the compliment and upvote regardless :D
+1Thanks for the upvotes! @Thunderthud & @DatMaluchGuy19 :D
+1Thanks for the upvote! @SPAircraftOfficial :D
+1Thnx for the upvote! @DatRoadTrainGuy19 & @Turbo18 :D
+1Thanks for the upvote! @Turbo18 :D
+1Thanks for the upvote! @DEN12345 :D
+1If the parts are on a fuselage part make sure you turn off part collision in the moving parts whenever they go through another part, then connect them together using the connector tool and nudge them into place. If it so happens the hinge rotator still doesn't work try replacing it with a new one, due to a bug it'll stay stuck.
+1@99807 OH MY... NO WAY KFO! HOW YOU DOING?
+1Thanks for the upvote! @Shimamurahougetsu :D
+1Thanks for the upvote! @NARGII :D
+1Djemet, i'm not in it D:
+1Thanks for the upvote! @DEN12345 :D
+1Thanks for the upvote! @EliteArsenals24 :D
+1Thanks for the upvotes! @Bryan5 & @McChezborger :D
+1@WolfHunter9111 hmm good idea. I was trying to look for something similar but could only find 1 tag suitable...
+1A high appreciation and thanks towards your upvote and spotlight @jamesPLANESii and @Scratchoza :D
+1Thanks for the upvotes! @Fighterpilot91 @weeeeeeeeeeeeeeee @ThomasRoderick :D
+1Thanks for the upvotes! @hpgbproductions @Ergithe @Ian_Yashima :D
+1@SMILEE yes i ment that haha, i always make my own custom cockpits, but thanks regardless :D
+1@SMILEE i never had any issues with my plane rolling due to what size i made my cockpit, so if this happens now, thanks for letting me know :D
+1Thanks for the upvote! @GorillaGuerrilla
+1Thanks for the upvotes! @Beasthunter @Jokeykokey
+1Thanks for the upvotes @Juno @Dathcha
+1