Christ! Droops we’re beyond me then but with the latest update I could rectify that….. I hate that wing it would have to be completely redone as it looks like a geodesic nightmare. I do like the trident however I have a back log of builds and really lack the motivation/time to build these days! @Mamontan
Excuse me, nearly 7k parts!?!? I’ve never built anything more than 650ish and that took some time - can’t imagine how long this took to build. Great ship!
Looks good but definite flight issues. I’d avoid large wing section as they tend to bend and show through the wing unless anchored at the other end. Personally I’d shrink wing sections down and bury deep in the build where they won’t be seen. Flaps have been mirrored so you need to reverse the input otherwise when you go to use them it just induces one a heck of a roll. I recommend taking a few hours just flying a build before posting in case there’s stuff you’ve missed or you’re not happy how the build handles - there’s no rush for posting builds after all, we’ll still all be here! Good looking build though!
Glad you're back! @GhostHTX (and seemingly to stay!!) I normally build over a period of months/years so this sort of challenge was refreshing but nonetheless damn vexing to meet the requirements.
Damn good stuff regardless! Noticed you’re on iOS still - unless it’s a decrepit old device like my brick you should be able to get designer suite and replicas should be a doddle to do :) @GhostHTX
Cheers, very kind of you! @Krikkit42 yeah I didn’t realise how hard it is to build with 50pts or less - I like the look of your entry I’ll have to take it for a spin!
Reference to the ejector seats? Yup, only the two pilots had ejector seats. Everyone in the back had to bail out - unfortunately a lot of accidents happened at low level/landing or takeoff which rendered bail out attempts useless for the rear crew. The pilots would walk away though.... @Haytham115
How does the new label curve direction help anyone? I thought as opposed to the original wrap, i.e. around a vertical cylinder, it would wrap around a horizontal cylinder - yet it only seems to tilt the middle out 45 degrees. Is this a bug or am I being thick? Apologies if someone has already registered this.
Thank you! I think you are all trying to get me on a bite ref the superjet ;) check the description and look at the plans at the bottom - it was built using designer suite and should closely resemble it :) @BlackWidowSquadron
Beautiful build, really captures the spit in all its splendour! I know tail draggers are a handful on the deck and this took a few attempts to take off without going into a tank slapper. Shame the underside camo wasn’t continued from the front cowling for the rest of the build. Lovely job all in all!
I agree with @Sparky6004 great build!!
+3Bloomin marvellous! Great nostalgic livery, brings me back to being a kid watching these take off.
+1No no, you’re all grouped together to us across the pond. Just like you reckon Scotland is in England!!! ;) ;) :)
+1Hard landing!! Looking marvellous though!
Impressive livery! Really blown away with what people are making these days!
An enjoyable build bravo!
+1Christ! Droops we’re beyond me then but with the latest update I could rectify that….. I hate that wing it would have to be completely redone as it looks like a geodesic nightmare. I do like the trident however I have a back log of builds and really lack the motivation/time to build these days! @Mamontan
+1Cheers! @Kendog84 certainly one of my older builds!
+1A bit morbid but I do agree that BEA livery is gorgeous. I need to get back into this game and sort my backlog out!! @Mamontan
Great looking build, is it my device that’s causing the woeful pitch response or am I missing something?
+1Excuse me, nearly 7k parts!?!? I’ve never built anything more than 650ish and that took some time - can’t imagine how long this took to build. Great ship!
+14Just “found in my files” an absolute beauty of GR1 Harrier, as you do… Stop showing off please :) :)
Nice job btw!!
Thanks @RaendyLeBeau kind of you! Yeah made this one a while back - doing a livery like this is so much easier now thank heavens!!
I do like the ‘bowling shoe’ northwest livery - great job!
+2Hmmmmm….. seems a heavy Russian bias ;) on a serious note how did we all score?
Not at all it’s a good looking build! @Otana
Looks good but definite flight issues. I’d avoid large wing section as they tend to bend and show through the wing unless anchored at the other end. Personally I’d shrink wing sections down and bury deep in the build where they won’t be seen. Flaps have been mirrored so you need to reverse the input otherwise when you go to use them it just induces one a heck of a roll. I recommend taking a few hours just flying a build before posting in case there’s stuff you’ve missed or you’re not happy how the build handles - there’s no rush for posting builds after all, we’ll still all be here! Good looking build though!
+2I’m quite proud to say I didn’t upvote the original. Nor shall I this one.
+1Christ this looks good. It’s a shame after all these updates there still isn’t an alternative to the horrid sound of a Cessna engine…..
Clearly 3 days ago when I made that comment it wasn’t the case @Almostbutnotquite
I’m glad someone else clocked the octopussy intro!
Glad you're back! @GhostHTX (and seemingly to stay!!) I normally build over a period of months/years so this sort of challenge was refreshing but nonetheless damn vexing to meet the requirements.
+1Sounds lucrative! I’m sure there’s most definitely a demand! @Augusta81
Upvoted because I smelt Lambo….. what is this wizardry however where one can have one part badges/insignia of sorts?!?
Damn good stuff regardless! Noticed you’re on iOS still - unless it’s a decrepit old device like my brick you should be able to get designer suite and replicas should be a doddle to do :) @GhostHTX
+1Definite intruder/marauder vibe - v nice!!
+1Upvoted for the build itself (politics aside) - opening sentence a touch close to the bone for some maybe.
+6Cheers, very kind of you! @Krikkit42 yeah I didn’t realise how hard it is to build with 50pts or less - I like the look of your entry I’ll have to take it for a spin!
+1Good looking build and you’re, ahem bronze!?!
+2Indicator of a meme build - more upvotes than downloads.....
Reference to the ejector seats? Yup, only the two pilots had ejector seats. Everyone in the back had to bail out - unfortunately a lot of accidents happened at low level/landing or takeoff which rendered bail out attempts useless for the rear crew. The pilots would walk away though.... @Haytham115
+1Sorry, that was next in line to be completed but I seem to have distracted myself with a sea vixen :) @VincenzoYoutube47
+1How does the new label curve direction help anyone? I thought as opposed to the original wrap, i.e. around a vertical cylinder, it would wrap around a horizontal cylinder - yet it only seems to tilt the middle out 45 degrees. Is this a bug or am I being thick? Apologies if someone has already registered this.
Fair play!! I look forward to your next builds! @Bogey
Bud, how are you bronze!?!?
Great looking build! How do you get to play underwater with it - it’s not a mod is it?
+1Naval craft was better!
+5No no no no.....
Much preferable to meme builds! Have a spotlight!
+1Find the xml wings buried at the wind root and add more. I don’t like infinite fuel and put in enough to potter around between islands. @Stevan
+1Glad to see you building again old bean! Spiffing kite btw!
+1Yeah Blackburn! :)
Thank you! I think you are all trying to get me on a bite ref the superjet ;) check the description and look at the plans at the bottom - it was built using designer suite and should closely resemble it :) @BlackWidowSquadron
+1Hmmmm.....something smells fishy. Is this your work?
+3Beautiful build, really captures the spit in all its splendour! I know tail draggers are a handful on the deck and this took a few attempts to take off without going into a tank slapper. Shame the underside camo wasn’t continued from the front cowling for the rest of the build. Lovely job all in all!
+1Yes. I’ll try and get it finished - quite busy just now might have to wait till the weekend if you want to be tagged? @Whycantimakeagoodplane66
It’s not been posted or finished so nope! @Whycantimakeagoodplane66
Not quite. Read the background info and you’ll see this predates the superjet. @EnzoDiazUnofficial
I hate to sound negative but how many Apache builds is that now?!?
Right. @GabrielFangster70