I was planning on entering the challenge, but my aircraft lack an RLM designation, could you name one for me pls? It is a twin engine Night fighter/Strike fighter.
Manufacturer: Marcox FlugzeugFabrik "MFzF", and the nickname is "Drachen".
@jamesPLANESii for the Rim is just a modified version of the Rim used in my Le mans prototype, as for the tires, I copied the tires from the Prixxer, then rescaled it, then modded the weight, then scaled it again to fit the dimensions and so on... (yeah, like 4 hours of just making a wheel)
@jamesPLANESii it doesn't use SP wheels, it will be a fully mechanical vehicle, from the pistons to the crankshaft, passing through a gearbox, a driveshaft, etc
this is sure a tricky drift track hahaha, it is giving my Audi Quattro a bit of a hard time mantaining the drift properly, maybe it will improve when I plug in my steerig wheel controller. awesome map mate! keep up the good work.
I'd suggest that you re-scale your assets, since road signs, cones, the wrecked car and other stuff are 3 times the size of what they would be irl. the bridge is a special case, while it is as well 3 times bigger than it should be, it only needs to be adjusted in height and width, lenght is ok. also the watch-towers are like 3 times bigger or more...
So, this is the 2nd C-130 to fall under peace time... this is bad (first one was Chile a couple of months ago). my sincere condolences to the fallen ones.
@Judmaierm ehh, I guess it is too much weight for this system, it only jumps around, even tho the gun is balanced. (legit is more stable while free than stabilized with the code...)
I was planning on entering the challenge, but my aircraft lack an RLM designation, could you name one for me pls? It is a twin engine Night fighter/Strike fighter.
Manufacturer: Marcox FlugzeugFabrik "MFzF", and the nickname is "Drachen".
can we put mods?
@ThePilotDude I swear in whatever language coms to my mind first xd
+1Watashi wa, Yoru Kitsune desu
+1@DickBrazen thank you! n.n
+1@RiChieCheese check out this wheel based on the tires of the prixer :3
@ACEPILOT109 @UltimatePlayer123 thank you very much
@Omel @Sm10684 @jamesPLANESii thank you very much! I hope this wheel is useful for future creations.
+1@UltimatePlayer123 it's just a normal fuselage.
@ToastyTaco thank you very much!
@Saturnite @Gameboi14 thank you very much!
@jamesPLANESii @Type2volkswagen
@Type2volkswagen yeah, that would be awesome (like in NFS Undercover and Carbono)
+1@SnoWFLakE0s I think I'll just make a taller tire profile, but that goes for another day.
@jamesPLANESii for the Rim is just a modified version of the Rim used in my Le mans prototype, as for the tires, I copied the tires from the Prixxer, then rescaled it, then modded the weight, then scaled it again to fit the dimensions and so on... (yeah, like 4 hours of just making a wheel)
@jamesPLANESii it doesn't use SP wheels, it will be a fully mechanical vehicle, from the pistons to the crankshaft, passing through a gearbox, a driveshaft, etc
+2@AgentofFortune nope, my issue is not with collisions with the own aircraft, but rather collisions with the ground...
+2@robloxweponco nice
@robloxweponco nice, I modified my Audi Quattro S1 for it, but I still haven't been able to finish the race yet xd
+1oh my godness, this is awesome!
@Sm10684 sure! go ahead!
this is awesome! we should host a Multiplayer car race just for this, and upload it on Youtube!
+1looks pretty derp :P
I see, a player of curlture as well nwn
@PointlessWhyshouldi I tried that at some point, but it didn't work...
@Sm10684 thank you very much!
procastination intensisfies, very cool pics and vehicles!
+1@Drummer1112 thank you very much! I hope you enjoy driving it!
this is sure a tricky drift track hahaha, it is giving my Audi Quattro a bit of a hard time mantaining the drift properly, maybe it will improve when I plug in my steerig wheel controller. awesome map mate! keep up the good work.
somehow I feel Squirrel is like the Yoko Taro of quotes on this website
+3the gun is not up to sale (0.45,0.45,0.45), in reality is a 202.5mm.
@SaintNPC thank you very much!
I'd suggest that you re-scale your assets, since road signs, cones, the wrecked car and other stuff are 3 times the size of what they would be irl. the bridge is a special case, while it is as well 3 times bigger than it should be, it only needs to be adjusted in height and width, lenght is ok. also the watch-towers are like 3 times bigger or more...
+1Update: I need to finish the gun sights and some final trials and it will be uploaded
@ChiyomiAnzai also the thing is 91 tons and the size of an E-100, if I put a 150mm I'll end up with a 93 ton MBT or so...
@ChiyomiAnzai maybe I'll mount a 150mm on a later variant, like the Otter MBT did xd
@ChiyomiAnzai actually... the tank is too big, the gun is a 128mm L/55 Smoothbore.
@winterro make them have disabled part destruction, that way the can keep rolling.
So, this is the 2nd C-130 to fall under peace time... this is bad (first one was Chile a couple of months ago). my sincere condolences to the fallen ones.
+1oh no... not the BETA again has PTSD flashback of Marimo being eaten alive...
+1@Judmaierm in the hull if I remember
aand... this mod is no longer supported by SP uwu
@Judmaierm ehh, I guess it is too much weight for this system, it only jumps around, even tho the gun is balanced. (legit is more stable while free than stabilized with the code...)
@Judmaierm apparently the gun was too front heavy, now' I'm rebalancing the whole thing and then I'll try the stabilizer again.
@Judmaierm ok, I'm trying this formula and it doesn't work as a proper stabilizer tbh...
very cool Centauro mate!
another competitor for the Rally championship awesome!
+1@calmanly thank you very much! enjoy your flight!
very amazing vehicle, tho it lacks traction, and a bit of power, making it unable to climb hills, but overall a very comfy ride on bumpy roads.
I'm having some Neon Genesis Evangelion PTSD...
+1