@TRGOBoom means that person(plane) has a bad connection. Your plane is your avatar, with a bad connection, your avatar(plane) cannot follow the given information, and seeks an alternative, thus coupling his avatar it to you.
If you push the throttle button up, that plane should start spooling up it's engines too.
@FuzzyAircraftProductions Look at this like this, it’s like a kite dragging a tail behind it. Propulsion in the head, AKA spinning wings on a rotator, the rest of the section have weak airbrakes te it make the body follow.
The flippers on this creation do barely any thrust.
@xCarlosProMCandSP999x Jundroo, the company. Does not make any aircraft, it is the community that does.
Find someone that is good at building airliners, and you can do a request to them, asking them to build on of the named aircraft. If you are lucky, that person might be willing to fulfill your wish.
liftScale, I just made the wings very big back then, liftScale was added during the last patch that happened (that is already ages ago). I discovered it 2 months ago when reading.
The reason the eel doesn’t lose altitude is because of tedious finicking with spinning wings on an endless rotator. Movement=lift
@FuzzyAircraftProductions scale the wing physics to a minimum using ‘liftScale’ and put propulsion in the head. An airbrake in the tail will do wonders for movement
Use blueprints, drawings, not photo’s.
*
Make sure it has a top, side, and front view.
*
Do not overcomplicate it, try something simple.
*
When you think it gets easy, step it up. When it’s too hard to do, shelf the project and start building a different aircraft. when you are done with that one, go back to the unfinished craft and try to finish it, repeat.
*
You do not need to make it 1*1, you can scale after with fine tuner
@MAPA also, I made a MILL-V12 with 80 parts that flies using 2 prop engines, but that one doesn’t, it has like 3 wings. And basically the same stats as a normal twin prop.
(Things that use gyros and less than 2 wings do spawn)*
@MAPA There is a small problem with the parts theory, I once built a big plane-thing(like 100ft), it has 121 parts and it spawns like crazy. Like 2/3 crazy, more than the tutorial plane.
It also has structural wings with wing psychics enabled
So, **It breaks nearly every rule, but it still spawns, so why does it?
I know some of the funkies only work in positive numbers
@PPLLAANNEE @TheFlightGuySP ‘s server, the one that starts with 160.something often laggy beyond playable. Never had that problem on his.
It changes IP sometimes, I believe he put a link to it in his video about MP gliders
since I am nice I’ll just put his link below
https://rebirths.kr/spserver/
If it does not work, just refresh
@SJMultiroleIndustry what’s the code used?
@FlyingPatriot good to know
@SJMultiroleIndustry if the part is a mod, there’s nothing I can do
@TRGOBoom means that person(plane) has a bad connection. Your plane is your avatar, with a bad connection, your avatar(plane) cannot follow the given information, and seeks an alternative, thus coupling his avatar it to you.
If you push the throttle button up, that plane should start spooling up it's engines too.
@KIRYU1770 use fine tuner, and scale it to 0.1 by disableling part scaling
Fine tuner is a stock mod, android and iOS has it too.
Looks great..... waiting for image.... There it is!
Your screenshots seem to be bugged, they only seem to stay visible on the listing itself.
@FuzzyAircraftProductions jointrotator.
I made a bear that uses the same code, i believe its called "telepoorting bear".
@FuzzyAircraftProductions correct
@FuzzyAircraftProductions Look at this like this, it’s like a kite dragging a tail behind it. Propulsion in the head, AKA spinning wings on a rotator, the rest of the section have weak airbrakes te it make the body follow.
The flippers on this creation do barely any thrust.
funni
@Tipo4062
If I did things right and you copypaste this, everyone in chis forum should get rickrolled
(There’s a chance that images won’t work because of a key, some images cannot be copied to other sites due to copyright.)
Or theres a space somewhere like between ()[], any spaces in or between these symbols will give an error
Open your image on google and copy what it says in your bar on top, like a link.
@JessaLeih different engine, different physics, they are importable, but there’s a chance your craft doesn’t fly the same
@xCarlosProMCandSP999x Jundroo, the company. Does not make any aircraft, it is the community that does.
Find someone that is good at building airliners, and you can do a request to them, asking them to build on of the named aircraft. If you are lucky, that person might be willing to fulfill your wish.
@FuzzyAircraftProductions You could do that, the last swimmer was ages ago for me
TarbosaurusThal beTagged out ofThoughtfull curiousness@FuzzyAircraftProductions it’s a rotator spinning wings underwater
@FuzzyAircraftProductions scaled to 0, it would look ridicilous if you could see it
I support creativity, I am all for it. Good job!
With a little more time and training , you should be able to do great things.
Keep up the good work my guy
liftScale, I just made the wings very big back then, liftScale was added during the last patch that happened (that is already ages ago). I discovered it 2 months ago when reading.
The reason the eel doesn’t lose altitude is because of tedious finicking with spinning wings on an endless rotator. Movement=lift
@FuzzyAircraftProductions scale the wing physics to a minimum using ‘liftScale’ and put propulsion in the head. An airbrake in the tail will do wonders for movement
@FuzzyAircraftProductions wings on an endless rotator
Use blueprints, drawings, not photo’s.
*
Make sure it has a top, side, and front view.
*
Do not overcomplicate it, try something simple.
*
When you think it gets easy, step it up. When it’s too hard to do, shelf the project and start building a different aircraft. when you are done with that one, go back to the unfinished craft and try to finish it, repeat.
*
You do not need to make it 1*1, you can scale after with fine tuner
1:(actual craft length)*(your craft length)= scale factor
@MAPA also, I made a MILL-V12 with 80 parts that flies using 2 prop engines, but that one doesn’t, it has like 3 wings. And basically the same stats as a normal twin prop.
(Things that use gyros and less than 2 wings do spawn)*
@MAPA There is a small problem with the parts theory, I once built a big plane-thing(like 100ft), it has 121 parts and it spawns like crazy. Like 2/3 crazy, more than the tutorial plane.
It also has structural wings with wing psychics enabled
So, **It breaks nearly every rule, but it still spawns, so why does it?
Let’s call this one the wingastard
@Vasarus555 попробуйте добавить второй пистолет, это должно решить проблему
@Hoawdie sure
@Nerfaddict tibia almost the same, you probably saw the older version, but it’s basically the same
@Monarchii horizontal turret traverse
@Monarchii try this, this mostly fixes the ai
@LJh1 something like the
Latecoère 299 A?
@Stinkysock read the description if you use androïde or iOS
@Mosasaurus88 fine, il take a look at it
yesss
@MAINE Aerospace or just aero
For the ones who want it, Mechagodzilla is out.
@ReignSUPREME anyway, how to do the smooth stops on the ends?
This was built in competition with Hiiamhere
(we challenged eachother to make any mechagoji, His will probably be ready tommorrow)
After that, you can rate who did it better
I will upgrade it in the future don 't you worry tail-drill fans, i cannot start any big projects now, i have final exams on the horizon for me.
Will the cars be tested on a track?
like something like maywar airport to mirage speedway?
@SilverStar you mean the Youef playcraft BB9201?
I still got it
(It was my uncle’s locomotive)
Use joystick bases, you can disable the floppyness on them
This stuff is just 5 mins of work I do in my breaks
@Mosasaurus88 my maths exams are my priority right now
@Monarchii there’s an auto-aim turret in the nose, when the angle is 3 degrees or less it activates the cannons