I enjoyed this mod with some friends! This is awesome! I noticed "Join" button is not working for some players (maybe windows 10 users?). I used "Connect [IP]" command and joined successfully.
@jamesPLANESii https://en.wikipedia.org/wiki/Sukhoi_Su-47
"The shorter boom, on the left-hand side, houses rear-facing radar, while the longer boom houses a brake parachute."
Oh, I should've add a parachute!
@BobTheTitanSP Wow, I didn't know that structural panel with control surface is possible! However, It is still not spawn as AI traffic. Airplanes about 120 parts does not spawn very often, because this game seems not counting parts correctly. It happened to my F-14 too...
@BeryllCorp Thanks for the information. It happens to me too. I had 16 AI planes (including default aircrafts), and I recorded airplanes 80 times in "Dense" setting, So there are 240 times of selection. The result is, my old airplane named "SimpleAsymmetricAircraft" appeared 64 times, and my "D Fighter" (the traffic friendly fighter I uploaded before) and "aiEscortBomber" appeared 34 times. Its obviously biased.
@BeryllCorp I know there is a flyability test. Right after starting sandbox mode, type ">>AircraftScript" in the console and you will see the list of airplane. If an airplane is not suitable for traffic regulation, the airplane will never appear...
I was wondering why it happens until I saw this post, and I figured out the cause. The airfoil of the vertical fin should be "symmetric", not "flat bottom".
Because of this, the airplane keeps yawing right. Then air stream comes from left side of the airplane, so right fin goes up, left fin goes down. As a result, the airplane keeps rolling left.
@Exumer I made 3D model from scratch. Existing model is too much complicated and cannot be recreated in SimplePlanes. You can find blueprint by searching "CAR_NAME blueprint" on google. You should use text editor or XML editor which has reload shortcut, because it will be useful to cooperate with in-game editor. I'm using TeraPad.
@Exumer I made a 3D model from blueprint on Blender. The model must be made of very simple shapes. Then, by reading angle of edges, I manually assembled each fuselage blocks in text editor. I also used Microsoft Excel to calculate rise and run of blocks. It takes long time even for Enzo Ferrari, Aventador will be much more difficult...
@Boxboy5 It was added in recent update. Now we can assign "LandingGear" input to hinges and rotators, or change the scale of normal landing gear by "scale" attribute. Devs did a really really good job!
@BaconEggs A month ago, I found my Ferrari with repaint for Youtuber, so I felt bit unpleasant and reported it. Then, Skua told me that it doesn't against the rule and Mods cannot delete it.
Ahh, I'm sorry for being late...
you can use get_fov to get default fov. It's 60.
@Awsomur
@jamesPLANESii Yes, I changed background color, camera FOV, and shadow visual by console command. I will post how to it on forums!
@Awsomur yeah I know, I already did it before, so I wanted to change it. BTTF DeLorean in Rocket League did the same!
Is it possible to hide jet engine exhaust while not flying?
Sometimes it looks bit ugly on some planes....
I didn't know that SP can use more than 16 colors!
Disable auto orient for gyroscope is not working, maybe.
I enjoyed this mod with some friends! This is awesome! I noticed "Join" button is not working for some players (maybe windows 10 users?). I used "Connect [IP]" command and joined successfully.
XML編集でプロペラのmaxRpmをより大きな値にすると、Engine Overspeedingの発生を抑止することができるので、スロットルがオフの時にテールローターを止めておくことができるようになりますよ！
@aircraftarsenal123 Sorry, It's not working on latest version of SimplePlanes, and I lost 3D model and project file too...
These models are used without author's permission...
@jamesPLANESii https://en.wikipedia.org/wiki/Sukhoi_Su-47
"The shorter boom, on the left-hand side, houses rear-facing radar, while the longer boom houses a brake parachute."
Oh, I should've add a parachute!
@AndrewGarrison
* AI aircraft still spawning from the water.
* Race expert achievement will never be unlocked.
AI aircraft still spawning from the water... I checked GlobalPosition on console and some airplane is in y-minus position.
It took me a while to understand what those rims were made of...
@MorningTea Hmm, I've never played that game.
@BobTheTitanSP Wow, I didn't know that structural panel with control surface is possible! However, It is still not spawn as AI traffic. Airplanes about 120 parts does not spawn very often, because this game seems not counting parts correctly. It happened to my F-14 too...
Maybe original model is here.
I think it has 8 wings...
@AndrewGarrison, @PhilipTarpley
@BeryllCorp It's ok. Thanks!
@BeryllCorp Thanks for the information. It happens to me too. I had 16 AI planes (including default aircrafts), and I recorded airplanes 80 times in "Dense" setting, So there are 240 times of selection. The result is, my old airplane named "SimpleAsymmetricAircraft" appeared 64 times, and my "D Fighter" (the traffic friendly fighter I uploaded before) and "aiEscortBomber" appeared 34 times. Its obviously biased.
@BeryllCorp I know there is a flyability test. Right after starting sandbox mode, type ">>AircraftScript" in the console and you will see the list of airplane. If an airplane is not suitable for traffic regulation, the airplane will never appear...
I was wondering why it happens until I saw this post, and I figured out the cause. The airfoil of the vertical fin should be "symmetric", not "flat bottom".
Because of this, the airplane keeps yawing right. Then air stream comes from left side of the airplane, so right fin goes up, left fin goes down. As a result, the airplane keeps rolling left.
Beautiful!
@jfriss Just like BTTF moive, you need to retract landing gear before takeoff.
@SimpleTechAndResearch Yes :)
@SimpleTechAndResearch He says he used small cockpit of my Ferrari. I think he did on purpose.
mirage speedway is worse than gold prix...
@Exumer I made 3D model from scratch. Existing model is too much complicated and cannot be recreated in SimplePlanes. You can find blueprint by searching "CAR_NAME blueprint" on google. You should use text editor or XML editor which has reload shortcut, because it will be useful to cooperate with in-game editor. I'm using TeraPad.
@Exumer I made a 3D model from blueprint on Blender. The model must be made of very simple shapes. Then, by reading angle of edges, I manually assembled each fuselage blocks in text editor. I also used Microsoft Excel to calculate rise and run of blocks. It takes long time even for Enzo Ferrari, Aventador will be much more difficult...
How about using small inlet?
@Boxboy5 It was added in recent update. Now we can assign "LandingGear" input to hinges and rotators, or change the scale of normal landing gear by "scale" attribute. Devs did a really really good job!
Fantastic!
Original video is here, and you should watch this too!
Yes this video is originally recorded by Toscio56, the author of this helicopter.
@WNP78 It's ok, but this helicopter is using some kind of bug of physics engine. so this may not fly if scaled down.
My swash plate is working fine. Good job!
By the way, it seems like yaw is inverted...
@BaconEggs A month ago, I found my Ferrari with repaint for Youtuber, so I felt bit unpleasant and reported it. Then, Skua told me that it doesn't against the rule and Mods cannot delete it.
I think it's a proper modification. I like his new color and spoiler!
@Powman5703 No it's being flipped from the beginning. He shoots missiles but he doesn't shoot guns. Is it happening to you too?
I want gear button rotator too! @Brields95
@TheMajesticMrL this :)
@ElGatoVolador Yes, but using only single button is way more simple. Isn't it?
@ElGatoVolador Players have to do "AG1 -> VTOL up -> AG1" with that, and authors have have to write description about it.
I need gear moving option for rotators!
@TheRemesy Yes you can, but I already did it.
My record is 84,721 ft, and I recorded the video.
+1I used single prop version of this.
@Skua Oh... sorry about that.
@GearGuy123 I searched the word "cod warbird" on google and found some image of SimplePlanes :)