Good ole backwoods central Pennsylvania. Most county's around me dont need emissions tests because theres like no one here 😂. Love this state most of the time lol
@DatRoadTrainGuy19 to make it yes, but then design no. I watched some people playing the 0.28 i think it is, and I was like that looks fun, let me make one 😂. I took real life photos for inspiration especially when it came to the suspension but other than that no lol
As far as they body goes, this is damn good! Dont think i can run it to try it out but it looks really good from the outside! Maybe try looking at other builders and how they build there cars and suspensions so your can get a better idea on how to do it. They dont have to be 1000% accurate, but having at least a spring would make any car work 100× better.
@Tingly06822 its freaking amazing 😂. Been kinda hard to build but its looking good. Yea im excited to see it as well 😂. The 312p came out really well so hopefully those can as well. Going to do the yellow scheme for it. The 296 is so tough to get the front end right so took a break so hopefully i can come back and like, oh this is how its suppose to go. I did that with the side intake for the 412, I left for like 2 months and came back and made it so much better. Man i rant a lot 😂
Can we do a sort of hybrid design for a replica? Im doing the USS Pennsylvania and i like the amount of guns on the original 1917 version but dont want to kill myself over the mast that they had in the version and was thinking of doing one of the easier retrofitted masts.
@Dragoranos me too lol, Just looks so agressive and the suspension is nuts. Definitely want to learn more about suspensions and suspension geometry, very fascinating.
I made a Ken block inspired pikes peak hill climb car, think im going to make the hoonapig now. One of my biggest insperations and honestly watching the hoonagan channel helped me to learn so much about aerodynamics and honestly is pushing me into that field. Will be missed by all.
@MRM19 honestly look at my k4. It'll give a basis of what should be done but had scratch make it compatible with his map so there a bit more complexity but it should give a general idea. Having a center, with spokes, and then another part where the linkage will attach to the wheel if i make sense.
@IceCraftGaming yea, i did, but honestly was kinda rushing to get this done so i could focus on a new project 😂. May or may not be some sort of off road centered trophy truck.........
@DatRoadTrainGuy19 lmao, thanks! Wanted to add a full interior and detailed engine bay but i couldn't get much past where it was unfortunately. And lol, i mean its been in the works for about a month, just got some time with the thanksgiving holiday
Rotary engines (otherwise known as a Wankel engine) uses a triangular shaped peice that rotates around in a ovular shell. For a radial engine challenge i dont think it'll work 😂. I know its easy to mix them up but my automotive technician brain had to say something 😂. Interesting challenge tho. Idk if ill join or not but maybe.
Now i see why you said the trailer took you a long time. That was freaking amazing!
+1Good ole backwoods central Pennsylvania. Most county's around me dont need emissions tests because theres like no one here 😂. Love this state most of the time lol
+1That third screenshot is so menacing 😂. Going to haunt my dreams tonight.
+1@LieutenantSOT hey, i didn't know you were that close to being done 😂. Looks great, and loved how it flew! One of my favorites from ya brother.
+1@Shavel24 lol, thanks! Got about 30 other things i need to do first but hey 😂
+1@DatRoadTrainGuy19 to make it yes, but then design no. I watched some people playing the 0.28 i think it is, and I was like that looks fun, let me make one 😂. I took real life photos for inspiration especially when it came to the suspension but other than that no lol
+1@LieutenantSOT yea i have but i was like, im to tired to respond to all that 😂. When i get some time today i will respond.
+1My man needs to put "simple"
+1T for both. That bush plane is smexy.
+1As far as they body goes, this is damn good! Dont think i can run it to try it out but it looks really good from the outside! Maybe try looking at other builders and how they build there cars and suspensions so your can get a better idea on how to do it. They dont have to be 1000% accurate, but having at least a spring would make any car work 100× better.
+1YYYEEESSSSSS!!! FINALLY!!! Looks so good!!!!
+1Yoooooo!!! @TheSonOfThunder congrats my dude! I knew you were going to win bro, definitely deserve it!
+1@Skyler101 ill be making a few versions, bosozoku, and may dream build, so yes, that's coming 😂
+1@Tingly06822 its freaking amazing 😂. Been kinda hard to build but its looking good. Yea im excited to see it as well 😂. The 312p came out really well so hopefully those can as well. Going to do the yellow scheme for it. The 296 is so tough to get the front end right so took a break so hopefully i can come back and like, oh this is how its suppose to go. I did that with the side intake for the 412, I left for like 2 months and came back and made it so much better. Man i rant a lot 😂
+1@TheSonOfThunder ofc!
+1This thing is fun to get screenshots for. Shes so photogenic. Love this thing so much brother. Definitely one of your best builds!
+1@TheSonOfThunder lmao, hmmmm
+1Make a bosozoku version 😂
+1This is so cursed but i can't look away
+1Can we do a sort of hybrid design for a replica? Im doing the USS Pennsylvania and i like the amount of guns on the original 1917 version but dont want to kill myself over the mast that they had in the version and was thinking of doing one of the easier retrofitted masts.
+1I kinda forgot about this thing, but still looks as good as i remember. Always loved the look of older prototype cars
+1@Dragoranos me too lol, Just looks so agressive and the suspension is nuts. Definitely want to learn more about suspensions and suspension geometry, very fascinating.
+1Me when guy back from dead shocked face emoji
+1And hurry up on the tbf, i wanna play with it 😂
I made a Ken block inspired pikes peak hill climb car, think im going to make the hoonapig now. One of my biggest insperations and honestly watching the hoonagan channel helped me to learn so much about aerodynamics and honestly is pushing me into that field. Will be missed by all.
+1Ah, the engines that burn more oil than fuel, gotta love em 😂. 13b engine is a fun little dude. Should make rob dahm's 4 rotor rx7 now.
+1Hey, i was making a 02 Mazda rx-7 fd3s spirit r type b but the front be hard 😂.
+1@Kroixo thanks bro!
+1@MRM19 honestly look at my k4. It'll give a basis of what should be done but had scratch make it compatible with his map so there a bit more complexity but it should give a general idea. Having a center, with spokes, and then another part where the linkage will attach to the wheel if i make sense.
+1@IceCraftGaming yea, i did, but honestly was kinda rushing to get this done so i could focus on a new project 😂. May or may not be some sort of off road centered trophy truck.........
+1@Nerfaddict @32 tags requested
+1This is awesome! Love the linkage, looks really sick.
+1@DatRoadTrainGuy19 lmao, thanks! Wanted to add a full interior and detailed engine bay but i couldn't get much past where it was unfortunately. And lol, i mean its been in the works for about a month, just got some time with the thanksgiving holiday
+1@SPAircraftOfficial if your in early enough you can 😂
+1@SPAircraftOfficial lmao, damn 😂. Thanks for the updoot!
+1@Kroixo @AlbertanPlaneMaker @SPAircraftOfficial
+1@XNorthern lol, for when i make drift version? Going to be awhile til then lol
+1@SPAircraftOfficial thats how you know its good 😂
+1Not bad!
+1Nice, 66.6k points 😂
+1Nailed them tail lights
+1@WolfHunter9111 lol, np!
+1@WolfHunter9111 lmao, the stock one was made almost a year ago 😂 the og 57 Bel air
+1Tags requested
+1@DatRoadTrainGuy19 @Dragoranos @G2
Thickums 😂
+1- Because for the love of god its been like a year 😂
+1@Dragoranos lmao, they are definitely a fun one to make!
+1@SchadeAircaftCompany lmao, yea Thats true 😂.
+1@SchadeAircaftCompany oooooo, ok. I think i know what your talking about now. My auto tech brain went straight to the automotive application 😂.
+1Rotary engines (otherwise known as a Wankel engine) uses a triangular shaped peice that rotates around in a ovular shell. For a radial engine challenge i dont think it'll work 😂. I know its easy to mix them up but my automotive technician brain had to say something 😂. Interesting challenge tho. Idk if ill join or not but maybe.
+1Wow, imagine being good at the game, holy crap she looks good! Gotta get back to my enzo, kinda forgot about her....
+1