@jamesPLANESii I did it as that as I was building, it's just that it glued when i nudged it to it's postition to see how it looked...anyways, after some patinece I managed to get it working again today.
@BRuthless ikr, I have two with high torque, but they are quite big, as RPM's are very limited in this game, one has to compensate with bigger engines xdd, I'll tag you
I'd like to test this vehicle, I'm also working on a Push rod Baja buggy rn, but it's a Tournament compatible buggy, wich means 100% stock and low part count.
I have experience making offroad vehicles and complex suspension systems. I have discord too!
@ThePrototype I've had the same problem, hence why I can't increase the RPM's more than 860, otherwise the rotators get out of place due to inertia and everything explodes
wait, LDD is still alive?! I used to spend hours playing and designing in that game lol. I knda miss some of it's features here in SP, like rotating parts by the hinges...
@DemonSniper8 I think you meant scaling the whole car I guess. Only issue is that that method tends to gets parte stuck...(happened with some of my piston engines, so instead I do thr parts with low dimensions from the beginning and a ton of patience)
@DemonSniper8 I used custom mass according to the material, as it usses metal for the chassis but Kevlar and carbon fiber for the side panels etc, so the car has a mix of parts with different mass settings. It was a whole mess to config what was what xd.
ok, seeing your paintjobs, is it a signature of yours to have the left aleiron and taileron painted in Red? also I need a serial number so it can be identified as your airforce (BNRV-60,52, etc)
is safety in the list too? I have a Jet from 6 months ago that was built for ground attack, and is one of the safest aircrafts I've ever built, can fly without an engine or even missing an entire elevon or part of the wing and return to base. or even take off without repairs for the next mission without worries xd
@Budderscotchtape there's always room for improvement ;)
looking forward to seeing this in progress! from a student car mechanic ;)
@jamesPLANESii I did it as that as I was building, it's just that it glued when i nudged it to it's postition to see how it looked...anyways, after some patinece I managed to get it working again today.
I thought it was a libellula LOL
@BRuthless ikr, I have two with high torque, but they are quite big, as RPM's are very limited in this game, one has to compensate with bigger engines xdd, I'll tag you
@BRuthless thank you very much! hope you enjoy this overengineered machine xd
@BRuthless thank you very much mate, haven't seen you in a while!
JUST QUATTRO
I'd like to test this vehicle, I'm also working on a Push rod Baja buggy rn, but it's a Tournament compatible buggy, wich means 100% stock and low part count.
I have experience making offroad vehicles and complex suspension systems. I have discord too!
I think the issue is not only that game, but Unity physics themselves, so there's not much to do...
@ThePrototype I've had the same problem, hence why I can't increase the RPM's more than 860, otherwise the rotators get out of place due to inertia and everything explodes
Happy new year!
@BaconRoll glad you like it!
Me see Mercedes Benz, Me like the vehicle
@LotterCrafts ok u.u
are mods like automaton allowed?
reads no starwars, design automatically discarded... can it be something Starwars inspired? but not exactly starwars?
@TheRealTDawg thank you very much, really apreciate it!
@Strikefighter04 thank you very much!
@randomusername like in the conrods or as engine mounts? I'm a bit lost on what part of the engine are you referring u.u
@randomusername what do you mean for support?
@BACconcordepilot I'll try that, maybe a 90°V8 should work properly.
welcome back mate!
@BlackhattAircraft np!
@BlackhattAircraft you can always make improvements! ;)
@FatNinja ohh, ok, no problem
Platinum players start filling the main page with A-10's, suspicious... nice work mate!
@GenrichTitov thank you very much! owo
@BogdanX thank you very much >w<
I can donate this aircraft if you guys need one, make a couple of tweaks and is ready to fly
maybe I could try making an Extra 300 with the "Halcones" paintjob
@FasterThanLight thank you very much!
that's amazing mate! may I ask, could you test in CFD one of my aircrafts?
@GenrichTitov guess we both come from the same root hahahah, might download LDD again, do you have a link?
yay! btw, I have an airsoft UMP.45, gotta love that SMG
wait, LDD is still alive?! I used to spend hours playing and designing in that game lol. I knda miss some of it's features here in SP, like rotating parts by the hinges...
@Mumpsy @DemonSniper8 @TrainDude thank you very much guys!
@DemonSniper8 lol
@DemonSniper8 I think you meant scaling the whole car I guess. Only issue is that that method tends to gets parte stuck...(happened with some of my piston engines, so instead I do thr parts with low dimensions from the beginning and a ton of patience)
@DemonSniper8 I used custom mass according to the material, as it usses metal for the chassis but Kevlar and carbon fiber for the side panels etc, so the car has a mix of parts with different mass settings. It was a whole mess to config what was what xd.
ok, seeing your paintjobs, is it a signature of yours to have the left aleiron and taileron painted in Red? also I need a serial number so it can be identified as your airforce (BNRV-60,52, etc)
@Remote I glad you like it! Have fun driving it! >w<
@thank you very much Struller78
no more than 650 parts R.I.P. Audi Quattro
is safety in the list too? I have a Jet from 6 months ago that was built for ground attack, and is one of the safest aircrafts I've ever built, can fly without an engine or even missing an entire elevon or part of the wing and return to base. or even take off without repairs for the next mission without worries xd
@JoshuaW
Really awsome creation! works flawlessly!
Mind asking, could you make me a set of gears? like a 3:1, 2:1, 1:1, 1:2
@Texasfam04 thank you very much!
@sexylips35 thx!
@Theplanelover77 @Tylerdeveneuzmusic @SodiumChloride thank you very much guys!