I am a first person guy. I like to build cockpits with functional gauges and controls and also some form of different auto pilot systems. A few of my creations even have a first person walker. I am not so much into replicas but try to give my fictional creations realistic or at leas plausible flight, driving or diving characteristics.
Hello , just upvoted!!!.
It seems that rain and snow are not working properly with glass fuselage. Maybe you can take a look into this. Super cool mod anyway...
@PPLLAANNEE Thanks for your reply. I know that i does not use rotators. I was just curious if there is information for the output of more parts. I use a lot of funky trees in my builds, and this information would be very useful.
@PPLLAANNEE Thank you for the info, I already have found that out by examining your build. I also know about the output from the camera. Is there a general information about outputs of other parts - rotators when floppy for example?
@STENDEC Yes, it is based on a crow.
The normal wings do strange things when mounted on rotators and in water.
Maiby I will build it again with structual wings, These don't flex and may behave better in water. Besides: Crows are no water birds :)...
@alexJgameYTukraine000000 Nice little Jet - more realistic then mine.
Bubble Jet startet as a glider for this:
https://www.simpleplanes.com/a/44BS0T/Sea-Raven
did not work so i cramed a seat and some instruments in it ...
This flies very well and everything works – especially the auto pilot!
We seem to build things in a somewhat comparable way.
The only thing “missing” for me are controls for yaw like peddles.
@Tsuchiisan Hmmm, I think calling a craft bad that works quite well under water and has some rare features is a bit harsh.
Besides, some submarines from different sci-fi shows look much more outlandish than this one.
@Bellcat Most Simple Planes creations would probably not work with realistic physics applied to them.
Glass canopy under water is always a bit of a problem in this game.
The front fins look detached because they turn for roll and pitch control. (Did you even try the craft under water?) There is no mention in the description that this craft is for exploration.
If you want a good looking plane, you should probably not download a submarine…
@OrderlyHippo UpDown is the InputId of the L and R buttos. The variable UpDown is needet to change the value back to 0 again when no button is pressed. (Don't ask me why I used UpDown as the ID for the L and R buttons ...)
I am a first person guy. I like to build cockpits with functional gauges and controls and also some form of different auto pilot systems. A few of my creations even have a first person walker. I am not so much into replicas but try to give my fictional creations realistic or at leas plausible flight, driving or diving characteristics.
Nice details and the suspension works really well!
Nice car and some interesting Funky-Trees Programming...
nice build with realistic flight characteristics...
@DatFiat126Fan19 will think about it...
Hello , just upvoted!!!.
+1It seems that rain and snow are not working properly with glass fuselage. Maybe you can take a look into this. Super cool mod anyway...
@TaPePolic https://www.simpleplanes.com/Mods/View/1357566/DarkBlue
@PPLLAANNEE This opens a lot of new possibilities! Thanks again!!!
@PPLLAANNEE Thanks for your reply. I know that i does not use rotators. I was just curious if there is information for the output of more parts. I use a lot of funky trees in my builds, and this information would be very useful.
@PPLLAANNEE Thank you for the info, I already have found that out by examining your build. I also know about the output from the camera. Is there a general information about outputs of other parts - rotators when floppy for example?
This is a cool contraption!!!
+1I have a question: Where did you get the information about the output of the springs???
works well - the glider even has a little cockpit...
Interesting build, flies smoothly with only 4 wings, I needed 8 wings to get a smooth flying ornithopter...
@STENDEC Yes, it is based on a crow.
The normal wings do strange things when mounted on rotators and in water.
Maiby I will build it again with structual wings, These don't flex and may behave better in water. Besides: Crows are no water birds :)...
Always looking for new ideas and interesting solutions
and there are a lot of them!
Amazing work…
@funkydome Thanks, hope you have fun with it!!!
Thanks for upvote!
I tested it only on pc where it works fine...
Made a submarine prototype with a rotator driven underwater engine.
It works without mods!
https://www.simpleplanes.com/a/pe7v15/Grauhai
https://www.simpleplanes.com/a/54128O/Flyer-3
@alexJgameYTukraine000000 Thankyou!!!!
@alexJgameYTukraine000000 Nice little Jet - more realistic then mine.
+1Bubble Jet startet as a glider for this:
https://www.simpleplanes.com/a/44BS0T/Sea-Raven
did not work so i cramed a seat and some instruments in it ...
Hey, glad you like it!!!
+1Works very well - no explosions ...
@Blueshift Thaks ...
+1a different way to build a walker ...
+1https://www.simpleplanes.com/a/WE9ghi/Desert-Walker
Cool map !!!
An interesting concept for a suspension…
An interesting concept for a suspension…
This flies very well and everything works – especially the auto pilot!
+2We seem to build things in a somewhat comparable way.
The only thing “missing” for me are controls for yaw like peddles.
@AnHNWhiteCornet Glad you like it - thanks for the upvote!
+1Thank you!!!
This is going to save me a lot of trouble in the future!
Also made an air ship a few days ago:
https://www.simpleplanes.com/a/EV7IFm/Air-Beluga
...
Why are you re-uploading my Post?
+1Are you trying to get upvotes this way?
It is a good thing that we have the "Auto Credit" function!!!!!!!!!!!!
@TheAviationBoy hey - thank you !
+1Flies very well ...
@STENDEC https://www.simpleplanes.com/a/83ZvG8/Gas-Balloon-V2
+2@TheBababooey https://www.simpleplanes.com/a/83ZvG8/Gas-Balloon-V2
+3@STENDEC working on an new way for the lift - this should fix it ...
+1@TheBababooey working on a new way for the lift ...
+1@OrderlyHippo I am thinking of putting up one - maybe I will ...
+1This is very impressive - you have my upvote!
+2@Micmekox Did not know about the game, just looked it up and there is a little resemblance.
+2Thanks for the upvote!
@Tsuchiisan Hmmm, I think calling a craft bad that works quite well under water and has some rare features is a bit harsh.
+1Besides, some submarines from different sci-fi shows look much more outlandish than this one.
@Bellcat Most Simple Planes creations would probably not work with realistic physics applied to them.
+1Glass canopy under water is always a bit of a problem in this game.
The front fins look detached because they turn for roll and pitch control. (Did you even try the craft under water?) There is no mention in the description that this craft is for exploration.
If you want a good looking plane, you should probably not download a submarine…
@Bellcat It has the tag "Fictional"!
+3At least it CAN really dive and maneuver under water...
Hello!
Here is my entry:
https://www.simpleplanes.com/a/B5cNSS/Black-Shark-V3
...
good wotk!!!
@WormWithLegs another sub with interior:
https://www.simpleplanes.com/a/Fe7653/Sea-Serpent
@OrderlyHippo UpDown is the InputId of the L and R buttos. The variable UpDown is needet to change the value back to 0 again when no button is pressed. (Don't ask me why I used UpDown as the ID for the L and R buttons ...)
+1@TRD6932 unfortuantely not - the cameras dont't work under water...
+2