@screechy
Thanks for the comment. Well, I don't know, I haven't tested it in VR, but I made it so that you can enjoy flying it from the cockpit viewpoint. Have fun!
@ivan6uy
No problem. If you do so, please submit your work as a "successor" to my work in accordance with the official rules set forth by Jundroo.
Official Rules : https://www.simpleplanes.com/About/Rules
@WinsWings
Oh my...thank you so much! I am very pleased.
Only 85 parts were used, but it's beautiful... less than 1/7th the number of parts of the ZERO I once created.
The flap controls are interesting.
@WinsWings
Oh, this was it. It's a transporter for the city of Pejite.
It's a simple yet distinctive design. And it's a design that would be interesting to make with SimplePlanes.
@AlexRol05
Oh...by news from Japan, do you mean the earthquake? That earthquake happened far away from where I live, so it didn't affect me directly. Thank you for your concern.
@ShinyGemsBro
Excellent.
It would be better if the rectification cover of the barrel of the 20mm machine gun and the bulge of the magazine storage area above and below the main wings were also reproduced.
The camouflage colors are very beautiful. Thanks for making a beautiful successor :)
@WinsWings
It is a great surprise, honor and pleasure to receive the 2nd place award for my J35F among so many great builds.
This challenge taught me two things after building only WW2 prop planes up until now. The fun of building jets and the fun of low part builds.
Thank you to everyone who has upvoted my builds. And thanks to WinsWings. And thank you for judging so many entries at the end of a busy year. I look forward to another fun challenge.
Happy New Year and may this year be a good one for all!
@DatMaluchGuy19
Oh, such a compliment is too good for me. But thank you.
Well, some people can be a bit brusque at times(especially sick and tired of people like Peter Muller), but I like this SP community... a cross-national group of people who like games, airplanes, cars, mechs, etc... it's interesting and I like it.
@FairFireFlight
I am relieved that justice has been done.
I believe the following works were copied without permission, although this may be inaccurate as I can't see his account already.
Tonnkatsu's B-17
https://www.simpleplanes.com/a/1l5uQ5/Boeing-B-17G-Flying-Fortress
Tonnkatsu's A6M1
https://www.simpleplanes.com/a/b5djfk/Mitsubishi-A6M1-Zero
Alisuchanka's Bf-109
https://www.simpleplanes.com/a/8TGOhu/Messerschmitt-BF-109-G-2
Sorry if I'm wrong.
@ToeTips
Thanks for the advice. I don't have an SPVR, so I wasn't sure if this piece would play comfortably on my SPVR. So I did not put a VR tag on it.
@ShinyGemsBro
I sincerely thank you for your sense of justice.
Yes, I knew all about it... that he has copied multiple works of mine without permission, that he has copied great works of others without permission, and that he has made personal accusations against me.
But I knew there was nothing more I could do. I could respond to his accusations, but that would only lead to a futile fight. I am sure he would not admit that he copied without permission. I felt so helpless that I considered leaving the SP community.
Ah, my friend, it was then that you, Candor, spoke up. You spoke up for the feelings of those whose works were unauthorizedly copied, and you made the accusation. Your integrity saved me. Thank you.
But...let's not condemn him any further. Enough is enough. I am waiting for him to create his own ingenious work, not an unauthorized copy.
Finally, once again, thank you ShinyGemsBro.
Thanks to you I will be able to make planes again.
@PeterMuller
Read my profile.
And don't copy my work. You have copied my Bf109 without permission and posted it falsely as your own work.
If you think you won't be found out, you're wrong. The person who created it will know. Because I put a lot of effort and ingenuity into my work over a period of days.
If you want to do it, follow the rules and submit it as a "successor".
I will block you.
Well, this concludes my challenge for the "Classic Jet Challenge". This challenge has taught me the fun of building under the 200p limit and the fun of building jets. I would like to take this opportunity to thank WinsWings. (And I apologize for not building one of the US classic jets that inspired this challenge)
@WinsWings
I see, you were born with a love of airplanes.
I too have loved Airplane since I was a kid... making and flying origami paper airplanes, reading books about airplanes and rockets, etc.
Oh, Falcon...so you are the same generation around Panavia Tornado too? lol
@WinsWings
Thank you! This is my first attempt so I don't know if it will work, but I'll give it a try. And yes, I will be careful not to make the file too heavy.
@WinsWings
Question. Is it possible to use the label parts generated by the converter in the following link in a work that will participate in the Challenge? I would like to use them for nationality marks. SP Label Converter
@HairJig
Thank you very much. I am honored to hear such words. But there are still more than 20 days until the deadline for the challenge. I am sure there will be more great submissions.
@WinsWings
Thank you very much!
It was fun to build it to keep it within 200 parts. I'd like to build and post another plane or two if I think I can afford to build them.
@screechy
Thanks for the comment. Well, I don't know, I haven't tested it in VR, but I made it so that you can enjoy flying it from the cockpit viewpoint. Have fun!
@Speedhunter
+1@Hahahahaahahshs
@TheAviator77
@LonelySea22
Thank you very much. I'm glad to hear it :)
@Bird6369
Uploaded modified XML file. Download it and try it out.
@Bird6369
+1Oops, it's true. Thanks for pointing that out. The formula seems to have disappeared. I'll upload a fixed version later.
I would like to participate in this challenge.
+1@MobileBuilder21
Thank you!
@WinsWings
+1Thanks for the comment.
I had a hard time deciding what kind of paint to use until the very end.
@Trainzo
@Hahahahaahahshs
Thank you very much! :)
Cool, simple, nice.
+1Nice representation of the radiator on the side.
@ivan6uy
No problem. If you do so, please submit your work as a "successor" to my work in accordance with the official rules set forth by Jundroo.
Official Rules :
https://www.simpleplanes.com/About/Rules
How to submit as a "successor":
https://www.simpleplanes.com/Forums/View/567539/Successor-Solved
@WinsWings
+1Oh my...thank you so much! I am very pleased.
Only 85 parts were used, but it's beautiful... less than 1/7th the number of parts of the ZERO I once created.
The flap controls are interesting.
@LonelySea22
+1Thanks for the comment.
I think the Tiger Moth you built is great too :)
@TheFlightGuySP
Thank you very much :)
@WinsWings
+1Oh, this was it. It's a transporter for the city of Pejite.
It's a simple yet distinctive design. And it's a design that would be interesting to make with SimplePlanes.
@WinsWings
+1Thank you for your comment.
I too like the flying machines depicted by Hayao Miyazaki. Is the red glider a "barge"?
@AlexRol05
Thank you. It was worth making :)
@AlexRol05
+1Oh...by news from Japan, do you mean the earthquake? That earthquake happened far away from where I live, so it didn't affect me directly. Thank you for your concern.
@AlexRol05
Well, I am fine.
...Why?
@WinsWings
+1Oh...that's because you are always upvoting and spotlighting my work. Thank you very much :)
@ShinyGemsBro
+1Excellent.
It would be better if the rectification cover of the barrel of the 20mm machine gun and the bulge of the magazine storage area above and below the main wings were also reproduced.
The camouflage colors are very beautiful. Thanks for making a beautiful successor :)
@WinsWings
+1It is a great surprise, honor and pleasure to receive the 2nd place award for my J35F among so many great builds.
This challenge taught me two things after building only WW2 prop planes up until now. The fun of building jets and the fun of low part builds.
Thank you to everyone who has upvoted my builds. And thanks to WinsWings. And thank you for judging so many entries at the end of a busy year. I look forward to another fun challenge.
Happy New Year and may this year be a good one for all!
@DatMaluchGuy19
+2Oh, such a compliment is too good for me. But thank you.
Well, some people can be a bit brusque at times(especially sick and tired of people like Peter Muller), but I like this SP community... a cross-national group of people who like games, airplanes, cars, mechs, etc... it's interesting and I like it.
@FairFireFlight
+3I am relieved that justice has been done.
I believe the following works were copied without permission, although this may be inaccurate as I can't see his account already.
Tonnkatsu's B-17
https://www.simpleplanes.com/a/1l5uQ5/Boeing-B-17G-Flying-Fortress
Tonnkatsu's A6M1
https://www.simpleplanes.com/a/b5djfk/Mitsubishi-A6M1-Zero
Alisuchanka's Bf-109
https://www.simpleplanes.com/a/8TGOhu/Messerschmitt-BF-109-G-2
Sorry if I'm wrong.
@DatMaluchGuy19
Thanks for the comment. I've already blocked him. And it looks like his account has already been banned.
@ToeTips
Thanks for the advice. I don't have an SPVR, so I wasn't sure if this piece would play comfortably on my SPVR. So I did not put a VR tag on it.
@ShinyGemsBro
+15I sincerely thank you for your sense of justice.
Yes, I knew all about it... that he has copied multiple works of mine without permission, that he has copied great works of others without permission, and that he has made personal accusations against me.
But I knew there was nothing more I could do. I could respond to his accusations, but that would only lead to a futile fight. I am sure he would not admit that he copied without permission. I felt so helpless that I considered leaving the SP community.
Ah, my friend, it was then that you, Candor, spoke up. You spoke up for the feelings of those whose works were unauthorizedly copied, and you made the accusation. Your integrity saved me. Thank you.
But...let's not condemn him any further. Enough is enough. I am waiting for him to create his own ingenious work, not an unauthorized copy.
Finally, once again, thank you ShinyGemsBro.
Thanks to you I will be able to make planes again.
@Tang0five
+1Thanks for the comment! I'm glad you like it. Actually, I was inspired to make this piece after seeing the movie "Dunkirk".
@MobileBuilder21
@Dest20345
Thank you for your comment. Those words are very encouraging :)
@PeterMuller
+5Read my profile.
And don't copy my work. You have copied my Bf109 without permission and posted it falsely as your own work.
If you think you won't be found out, you're wrong. The person who created it will know. Because I put a lot of effort and ingenuity into my work over a period of days.
If you want to do it, follow the rules and submit it as a "successor".
I will block you.
@kaokaoo
Thank you for your comment! :)
@AlexRol05
+1Thanks for the comment. I am honored to receive such words. Have a good Holiday to you too.
@WinsWings
+1Thank you very much!
Thanks also for the spotlight.
@Rocketguy2079
Thank you :)
You finally made it. Congrats!
+2Zero's final model, beautiful.
@WinsWings
+1Yea, it's a Swedish dragon.
Hope you like it :)
@ariakenori
+2Thanks for the comment. I am honored that you enjoy my posts :)
Well, this concludes my challenge for the "Classic Jet Challenge". This challenge has taught me the fun of building under the 200p limit and the fun of building jets. I would like to take this opportunity to thank WinsWings. (And I apologize for not building one of the US classic jets that inspired this challenge)
@L3FT2R1GHT
Ah, thanks for reading my profile. I'm glad to hear that.
@VOLOTOK
+1Thanks for the comment. Glad we like the same planes :)
@WinsWings
+1I see, you were born with a love of airplanes.
I too have loved Airplane since I was a kid... making and flying origami paper airplanes, reading books about airplanes and rockets, etc.
Oh, Falcon...so you are the same generation around Panavia Tornado too? lol
@WinsWings
Wow, I'm glad to know you like "Tunnan" too. It's worth it to make this build :)
Thanks for the spotlight too!
@WinsWings
+1Thank you! This is my first attempt so I don't know if it will work, but I'll give it a try. And yes, I will be careful not to make the file too heavy.
@WinsWings
Question. Is it possible to use the label parts generated by the converter in the following link in a work that will participate in the Challenge? I would like to use them for nationality marks.
SP Label Converter
@MobileBuilder21
Thank you so much! :)
@HairJig
Thank you very much. I am honored to hear such words. But there are still more than 20 days until the deadline for the challenge. I am sure there will be more great submissions.
@dINE
Thank you very much!
@WinsWings
+1Thank you very much!
It was fun to build it to keep it within 200 parts. I'd like to build and post another plane or two if I think I can afford to build them.
@WinsWings
+2@froge
Thank you very much :)
Nice.
+1I'm in.
@MobileBuilder21
Thanks a lot!